• HW Installation Support

  • Canbus error VW PQ (etc) SWC Voice Assistant Button

gismo The engineers notified us of the need to upgrade the protocol box and I would like to post the software on the forums, but am concerned that uninformed users or other automotive users may download the upgrade by mistake and cause CANBUS to fail. Do you use Telegram or WeChat? I will send you the software via private message
Also, what city or country are you in?

      dudu-lai yes I'm on telegram - username is @Georghms
      If you have an update for the Hiworld VWFA.20 box also, I could test that as well (it has other errors but has a 2019 firmware). But normally I use the Raise box so that's more important.

        20 days later

        @dudu-lai solved this by way of providing a Raise Canbox firmware update.

        2 months later

        Hi @dudu-lai , i've also the Problem that the voice assistant is mapped to mute. Is there a solution like an updated firmware for my raise protocol box? My Car is also VW T6 built in 2018...

          What are the differences between Canbus VW-RZ-08 and G-RZ-VW58? I have RZ-08, but i see on the pictures with Software Info, that RZ-VW58 is shown as RZ-08, are they the same Canbuses?

          dudu-lai
          Thanks, this work for this issue. I had others also, that the climate control is not showed if I do changes on it.... for that i will open other threads.

            DUDU7.carlink250413.apk
            Please update this version to test if the problem is solved.

              7 days later

              DUDU-Meng
              your application is for carlink, not for climate control... After installation my android auto has connected... should be nothing to do with that...?

                dudu-lai
                I tried to update CANBUS with your file, but after selecting it from HU memory and clicking START, I only see a warning, I confirm and nothing happens. I saw on various forums that the update is done from USB memory, not internal, but when selecting the file, there is no option to select USB. Is this update file for all Raise G-RZ-VW58? This is my version.

                    Slavus Yes, CANBUS update selects internal storage

                        dudu-lai i can't update with your file, nothing happens after start, only warning, i click OK, then nothing.
                        This is my CANBUS

                            i have a similar issue where the voice button on the steering wheel is not working, this should engage google assistant , it works only while in the home page dudu7 but in android auto is not launching the assistant, instead it is activating on my phone. any ideas on how to change this behavior so the assistant activates on the headunit instead?

                            Slavus Show us how you do it on video!

                                dudu-lai
                                When trying to update, CANBUS operation is blocked, no response to pressing the steering wheel buttons. The attempt was unsuccessful, as I wrote earlier, additionally, after updating to version 3.6 beta3, the device cannot be restarted, this can only be done via the "recovery" button on the system information screen. I also tried updating Canbus on Mekede M600s, the effect is the same, i.e. no effect 😉 below is a link with a recording of the update attempt

                                [https://drive.google.com/file/d/1NcGfk8tBZjdcX2Rdp2ugGSEmH0DklVQE/view?usp=drivesdk]

                                    Slavus Are the air conditioning controls and door messages working?

                                        dudu-lai Everything works, CANBUS is blocked only when the update application is enabled. Then you can't even reset the HU, except the way you see in the video. After restarting it's fine again.

                                          Slavus finally i bought another Raise G-RZ-VW58 with 2402 production date and upgrade ends succesful, Voice Commands starts with SWC buttton