Canbus error VW PQ (etc) SWC Voice Assistant Button

Bettman66

gismo ,
Touran 1T3 PQ35

dudu-lai

You're doing a great job. I will organize this information and submit it to the engineers.

dudu-lai

gismo The engineers notified us of the need to upgrade the protocol box and I would like to post the software on the forums, but am concerned that uninformed users or other automotive users may download the upgrade by mistake and cause CANBUS to fail. Do you use Telegram or WeChat? I will send you the software via private message
Also, what city or country are you in?

gismo

dudu-lai yes I'm on telegram - username is @Georghms
If you have an update for the Hiworld VWFA.20 box also, I could test that as well (it has other errors but has a 2019 firmware). But normally I use the Raise box so that's more important.

gismo

@dudu-lai solved this by way of providing a Raise Canbox firmware update.

Bladerunner666

Hi @dudu-lai , i've also the Problem that the voice assistant is mapped to mute. Is there a solution like an updated firmware for my raise protocol box? My Car is also VW T6 built in 2018...

dudu-lai

Bladerunner666 Upgrade CANBUS
https://drive.google.com/drive/folders/1U0ftGdTmfPug6knCsYMaBpKB7tnoMKyJ?usp=sharing

Bladerunner666

dudu-lai
Thanks, this work for this issue. I had others also, that the climate control is not showed if I do changes on it.... for that i will open other threads.

Slavus

dudu-lai
I tried to update CANBUS with your file, but after selecting it from HU memory and clicking START, I only see a warning, I confirm and nothing happens. I saw on various forums that the update is done from USB memory, not internal, but when selecting the file, there is no option to select USB. Is this update file for all Raise G-RZ-VW58? This is my version.

Slavus

What are the differences between Canbus VW-RZ-08 and G-RZ-VW58? I have RZ-08, but i see on the pictures with Software Info, that RZ-VW58 is shown as RZ-08, are they the same Canbuses?

DUDU-Meng

DUDU7.carlink250413.apk
Please update this version to test if the problem is solved.

Bladerunner666

DUDU-Meng
your application is for carlink, not for climate control... After installation my android auto has connected... should be nothing to do with that...?

dudu-lai

Slavus Yes, CANBUS update selects internal storage

Slavus

dudu-lai i can't update with your file, nothing happens after start, only warning, i click OK, then nothing.
This is my CANBUS

dudu-lai

Slavus Show us how you do it on video!

McDudu

i have a similar issue where the voice button on the steering wheel is not working, this should engage google assistant , it works only while in the home page dudu7 but in android auto is not launching the assistant, instead it is activating on my phone. any ideas on how to change this behavior so the assistant activates on the headunit instead?

Slavus

dudu-lai
When trying to update, CANBUS operation is blocked, no response to pressing the steering wheel buttons. The attempt was unsuccessful, as I wrote earlier, additionally, after updating to version 3.6 beta3, the device cannot be restarted, this can only be done via the "recovery" button on the system information screen. I also tried updating Canbus on Mekede M600s, the effect is the same, i.e. no effect 😉 below is a link with a recording of the update attempt

[https://drive.google.com/file/d/1NcGfk8tBZjdcX2Rdp2ugGSEmH0DklVQE/view?usp=drivesdk]

dudu-lai

Slavus Are the air conditioning controls and door messages working?

Slavus

Slavus finally i bought another Raise G-RZ-VW58 with 2402 production date and upgrade ends succesful, Voice Commands starts with SWC buttton

Slavus

dudu-lai Everything works, CANBUS is blocked only when the update application is enabled. Then you can't even reset the HU, except the way you see in the video. After restarting it's fine again.