Best OBDII?

rille

I did it this way, it doesn't work. The OBD dongle is listed but it doesn't connect. I tested with vLinker MC+ and iCar Pro 2S, both support Bluetooth LE. You should have a list with working devices... It's the same as with the CAN adapters. No list which adapter is working and the one suggested by support chat is also crap.

surfer63

rille
Same for me. Previously on the 7862 unit, and now on the dudu7 unit.
The elm327 is there, it is found by BT, but I simply cannot pair it. It works fine with my phone and previous 2 phones.

rille

It works with Car Scanner installed at the DUDU7. But the integrated OBD feature doesn't work.

Dingle34

elm327 working when I connect to bluetooth in the android settings (not BLE) for 3rd party apps, but it doesn't work in DUDU OS.

To get it working in the OS I had to connect it through the OS settings in the ODB section, but then it doesn't work with 3rd party apps.

rille

Dingle34
It's normal that the OBD dongle can be used by only one software. Did you get your dongle (which one is it?) to work so you can display sensor values from OBD in the status bar or in the widget?

McFive05

Apparently, the built-in controller in the ELM 327 dongle is responsible for whether it connects

I use this
https://de.aliexpress.com/item/1005007315943987.html?spm=a2g0o.order_list.order_list_main.11.4b2e5c5f6bmgtt&gatewayAdapt=glo2deu

with Chipset: MM32L073
works under Dudu6

gismo

My vGate vLinker MC+ had no problems getting paired via Android BT settings and I can use it on DUDU7 just the same way I used it on my previous FYT7862 unit: Mainly an app to monitor the DPF (VAGDPF) and secondly Carscanner. I have not tried to use it with the internal DUDU7 OBD stuff because i) I'm concerned that it would interfere with the above apps (I always need to disconnect one to use the other so afraid that DUDU just blocks other apps) and ii) DUDU7's OBD functionality seems rather basic (generic OBDII rather than car specific protocols) so not sure as regards benefit - fuel consumption etc is available in the car anyway. If DUDU7 could read/interpret the status of VW group DPFs incl. regeneration and gear box / clutch temperatures then I would sunset the other apps 😉

ahmedjassm

I got the KUULAA OBDII. It is connected to the DUDU OS, but there is no data showing in the status bar or in vehicle information app. I test it with a third party app, and it works fine.
My car is 2007 Toyota Camry Hybrid.
Head unit 13” FYT.
OS DUDU 7862 V240927.

Kindly, if someone has a solution for this issue please share it.

MihaiFlorin

ahmedjassm I have Corolla Hybrid and the only data that I get is cooling liquid temp and battery (12v) voltage.

ahmedjassm

MihaiFlorin
I am getting the battery voltage even without the OBDII.
I think it is measured by the head unit, not sure.

ahmedjassm

MihaiFlorin
I got VEEPEAK OBDII, it is works perfectly with Dr. Prius and Hybrid Assistance apps. But it doesn’t connect to DUDU OS.
I just want to share this with you in case you want to try these apps.

MihaiFlorin

ahmedjassm I have Vgate vLinker Mc+. Same situation. It works perfect with Dr. Prius and Hybrid Assistant but I can't make it work with Dudu.

dudu-langzi

MihaiFlorin Because foreign OBD may be different from our domestic products, this needs to be matched according to the equipment. Tomorrow I will ask the developer if I can get some samples to match.

dudu-langzi

@"ahmedjassm"#p2796Yes. The host itself can obtain the voltage.

ahmedjassm

dudu-langzi
That will be greatly appreciate!

MihaiFlorin

dudu-langzi I already provided a sample of vLinker MC+ to your team. But the devs said to have patience because it is not on the priority list at the moment.

koba

Is there any news on this topic? use the vlinker ms!

1ccs-todd

I need a new OBD2. Mine is an old slow BT2 model.
Will OBDLink SX be supported anytime soon?
Should I wait for development, or order one of the adapters recommended in Telegram channel?

911WRM

Can you share the list of adapters listed on Telegram please? I would like to buy one that definitely works!

Chubaka885

911WRM https://t.me/duduauto/17916/17918

surfer63

Chubaka885

I mentioned earlier that I have 3 OBD dongles and none of them worked.
I just saw the list on Telegram and one of my OBD dongles is that Noname one.

It did work on my Mekede 500S, but not on my dudu7. Not via the settings, as it should be done, and neither when trying to directly couple it in Bluetooth.
I guess it is a hit and miss. How many "confirmed Noname working" reports are there?

Edit: yaoxilong advised me then to try with Bluetooth= 0 instead of 7. It didn' t make any difference.

« Previous Page Next Page »