• DUDU OS

  • Best OBDII?

    la

This one works with DUDU7 and shows me coolant watertemp and fuel amount in the statusbar:
Junsun:
https://nl.aliexpress.com/item/1005007979336712.html?spm=a2g0o.productlist.main.35.b6b61cb4rXaMwR&algo_pvid=65a9a216-df92-4068-b9cb-68932ffeb4b1&algo_exp_id=65a9a216-df92-4068-b9cb-68932ffeb4b1-17&pdp_ext_f=%7B%22order%22%3A%22292%22%2C%22eval%22%3A%221%22%7D&pdp_npi=4%40dis%21EUR%2123.28%2113.19%21%21%2123.28%2113.19%21%402103847817440320892668025e94f4%2112000046033650745%21sea%21NL%21139443966%21X&curPageLogUid=jNGc4KfIF7Lf&utparam-url=scene%3Asearch%7Cquery_from%3A

No special setup required, paired in DUDUOS Settings.
And for a good price.

    It just should have the name OBDII in the list of Bluetooth devices.
    You can get all those adapters to work with DUDU OS.

      JhonnyD I've tried 3 different ones, 2 that show up as OBDII and none of the 3 work with DUDU

          9 days later

          tsbrewers tsbrewers Is the PIN to pair 0000 on these IBD2 devices ?
          By default, Dudu will use 0000 aas the pairing PIN. If it is something different - you need to change the BT Phone pairing code to 1234 or whatever it is.

              a month later

              gismo and yet my newly purchased vLinker MC+ wont connect to my DuDu 7 Head unit. I have a collection of 5 now and none work.

                  johnyfalco it's even officially supported now (v3.6 release). Mine connects fine, either in the devices settings or in the Android BT settings of my Dudu7. On older DuduOS versions, only the Android BT settings worked.

                      johnyfalco What's more, Vgate iCar Pro 2S also works on the vLinker MC+ setting. At first it had problems reading fuel level or coolant temperature, but after a few starts everything works regularly. Connecting to OBD is very easy. Can you show how you try to connect OBD to DuduOS?

                          • DDimok

                            • Post #66
                            • This post is in русский

                            Вам необходимо в пункте BT Phone поменять пароль на тот который требует ваш адаптер.
                            Затем в пункте OBD выбрать ELM 327, и ниже выбрать адаптер.
                            Важно. Адаптер не должен быть сопряжён, ни с чем. Ни с андройдом ни с DUDU в меню BT.
                            После чего у меня начали отображаться все значения.
                            Получилось просто случайно. я тоже пытался его принудительно сопрячь.

                            5 days later

                            i have like this on my dudu7.
                            Does this mean it working?

                              wolf-jr This is Canbus or external TPMS, not OBD2.
                              The data on your second Foto is OBDII or canbus

                                  Slavus does it automatically connect at launch? i seem to have to reconnect it every time, every monring for it to connect correctly.

                                      JhonnyD yes i mean the second one, does it mean i successfully connect my dudu7 to OBDII?

                                        donne Yes, it connects automatically every time.

                                          gismo which model do you use? I just update to 3.6 and would like add an OBD II (as my canbus doesn't read car data)

                                              SDeath I have this one, it worked on the 1st setup and then it stop working, worth to say, when it worked on Dudu I was impossible to make it work with torque, and then after a reboot, it works on all apps but not with Dudu...

                                                mircondini vGate vLinker MC+

                                                  5 days later

                                                  Got vGate vLinker MC+ and DUDU7 detect it (but not still shown on the status bar🤔) ... but, the only values readable are fuel, H2O and what else? If I would like use OBDII even with an app (on DUDU7 or phone) how to proceed?

                                                    • JhonnyD

                                                      • Post #76
                                                      • This post is in Deutsch

                                                      mircondini Du musst ein Canbus Protokoll einstellen, egal welcher.
                                                      Dann wird etwas angezeigt.
                                                      Ich weiß nicht wieso.

                                                          JhonnyD I already have a canbus protocol

                                                            5 days later

                                                            gismo Hi, I bought the same OBD, but I need to reconnect every time and only water temerature had shown. Any suggestion?