Assign the right can bus box hardware

hafiz_tahir

dudu-lai may i know where you find this doc? I want to check the supported signal for my canbus box (raise)

Marv2525

hafiz_tahir check szraise.com

hafiz_tahir

dudu-lai may know will we able to contact raise directly to ask for the implementation? Or need to be fron DUDU engineer?

dudu-lai

hafiz_tahir Sorry, Raise does not disclose information about Proton cars. You need to contact Raise to obtain it.
I am just a porter, copying some public information of CANBUS box.

hafiz_tahir

dudu-lai ya, i try to browse their website for the documentation, also not available. I will try writing to them to ask about it. Want to know what data available.

sleis

Good luck. I wrote them about my chevrolet volt a month ago, never got an answer

hafiz_tahir

sleis raise?

sleis

sure

sleis

dudu-lai

sleis The Raise engineer I contacted finally responded.
He recommended using the G-RZ-GM61 model. The wiring harness you're using needs to have CGI cables.

sleis

dudu-lai Do you know which sales channel i should/could use to order the raise G-RZ-GM61 Can bus box?

dudu-lai

sleis I don't know either, try searching on AliExpress

sleis

Is there more info to the G-RZ-GM61 Box? I found one but the other information on the box shows me same software version (SW:V001.41) and nearly the same hardware (HW:GM-GD7L-0A01 date 250927) so maybe i just could update my 51 box to a 61 box?

sleis

Do you think this will do?

dudu-lai

sleis Yes

sleis

The Raise G-RZ-GM61 arrived and after installing it in the car i am surprised IT DOES THE JOB!

Finally there is a Can Bus Box compatible with the basic functions of the Gen 1 Chevrolet Volt. So far i tested the
original car control panel: (Volume knob WORKS 100%, Upper rotating knob works- tough its changing songs, HVAC buttons WORKS all but assignment about 80% correct, Multimedia button WORKS 40%)
can bus data: (Blinker works, SWC works, Steering angle works, some more data is working (needs more time for testing)

« Previous Page