DUDUOS 3.6 Beta5: Fine-Tuned Performance and Enhanced Stability 250430

reg66

ckolibab
Further to my last post (can't seem to edit), ignore what I said about using 3rd party apps. Just tried again to use torque pro whilst still connected to car/dudu device settings and it pairs fine. Can use both dudu and torque etc to get readings/rpms/data etc etc just fine 👍

DUDU-Meng

Benruba2025 Please open the System Update App/More Updates/Find the latest Bluetooth firmware and update it.

Benruba2025

DUDU-Meng he realizado su sugerencia y no ha resuelto nada, al contrario, ahora funciona peor.
Android Auto Se conecta automáticamente pero a las diez segundos se cierra y hay que pulsar la aplicación Carlink 2.0 para que conecte de nuevo.

DUDU-Meng

reg66 It's a system update app

ckolibab

reg66 Thank you!

ckolibab

reg66 Does Thinkcar work well with DUDU as well? I had a few devices that were just not feeding the parameters properly. Thanks for the help!

reg66

ckolibab
Haven't tried the Thinkcar with Dudu yet. I'll try and give it a go later. I've only used the Lelink2 as it completely powers down after ignition off.

Are you after any specific info from Dudu/a 3rd party app installed or just the basic info that Dudu settings show regarding standard car info...?

dogsfoot

Chadles What is media auto?

kolarov

surfer63
I tried removing the flash drive, turning off the specified applications in PIP, but unfortunately the problem persists. The only external device that is still plugged in is a mobile data SIM card, but it shouldn't be one of them.
Any advice on how to find the app that is preventing FYT from going into deep sleep?

reg66

kolarov
Not sure if it'll help find the culprit of device not going to sleep. But you could a wakelock detection app. It shows you what processes are causing wakelocks on android devices and might point you in the right direction for what's causing it not to sleep

reg66

kolarov
Try Better battery stats from play store (with regard to my previous post - about detecting wakelocks)

CHR12345

kolarov

Do you have any apps active in the sleep and keep alive setting? Under-

Settings :: Vehicle :: Startup

If so, try toggling them all off, could it be an app if being kept alive, be preventing hibernation.

kolarov

reg66
I'll try, but when I read about this application, it requires root, and my device doesn't.

CHR12345
I checked, but I don't have an app that's starting up and preventing it from going to sleep. The problem is somewhere else.

Romanus

на Teyes Luxe One 12.3, все установилось быстро, я забыл распокавать в корень флешки, сброс до заводских настроек.
но все установилось. буду проверять. и наверное еще раз сделаю обновление со сбросом завоские настройки

PatrykWaw

In this version, the backlight does not switch based on the activation of low beam headlights in PSA group vehicles.
Additionally, the fuel consumption units in the vehicle information are incorrect — it should be l/100 km, but it shows km/l.
Everything worked correctly in the previous version (Beta 4).

Romanus

на Luxe One Teyes - откатился обратно к DUDUOS 3.6 Beta4 250421 .
новая прошивка проблема с подключение к аккаунту гугл, очень долго. и тормозит работа. не нашел камера переднего вида в программах - и значках..

MicioMax

Hello,
1) I've problem on Navbar, some buttons do not work at all (for example the all application button) and some work (the settings button do)
If I remove and add the button nothing changes.
I reinstalled DUDUOS performing a full reset, the Navbar worked for some time correctly, then stopped again with identical behaviour : settings button works (even adding and removing it), other buttons simply do nothing.
Settings of Navbar in deskstop style settings page just crash (italian message is "Impossibile ottenere informazioni sulle impostazioni")
2) Bluetooth phone widget shows "unconnected" status. I click to connect, it shows the connected phone as connected. I close and still shows as unconnected. If I disconnect and reconnect nothing changes, closing connect popup still shows "unconnected" in widget.
3) I'd like to have Youtube music inside music widget. Not a big problem indeed, but...

Point 1 and 2 makes duduos almost unusable. I'll try with 3.5.

Geruda32

Hi,
Peugeot 3008 2016, Raize canbus box.
On Beta 4, when i press A/C command button on my dashboard, the "old style" A/C control panel show correctly.
In Beta 5, when i press A/C command button, nothing show, i have to go searching the new A/C control panel manually in app drawer.

DUDU-Meng

Geruda32
I'm sorry, I didn't get the point you were making.
Can you make a video to reproduce it

19712809

Здравствуйте. Подскажите где взять инструкцию по установке видеорегистратора 2к DBR DUDU. У мня мигает изображение.

Geruda32

DUDU-Meng
Hi,
I can't make videos for moment, but i can describe more precisely.
In my peugeot 3008, i have this button to set A/C Temp:

Before Beta 4 and 5, when i press this button, it open the "old style" A/C control panel (picture for example):

Now, with Beta 5, this button does nothing, i have to go in app drawer to search after A/C Control app to show the new interface:

The new interface work well, good canbus protocol selected (RCZ, 3008, i've tried all), but pressing button not showing A/C panel ...
I hope my description was clear.
If you'd still want a video, I'll do my best to send one to you.

Regards

« Previous Page Next Page »