Nissan Pathfinder harness+canbus issues

kryzys

Wildpjw Thank for the info, but it is not the case. My A/C controller is left connected inside the dashboard. Unfortunately the problem lies somewhere else 😐

kryzys

I could have been wrong... as I cannot find any log files I started analyzing canbus output on the screen. And it turned out that A/C panel buttons/knobs does not give any feedback. While pressing other buttons shows canbus messages.
So I went back to the documentation and one thing catched my attention:

and this:

Could it be that these buttons are controlled differently than the rest? My harness doesn't have the "H" connector. Could someone point me to the place where I can find more information about it?
I cannot find more information about this "H" connector in this documentation.

I don't want to surrender... I'll try to win this uneven fight 😉

Wildpjw

Are you able to send me all of the documentation you have so I can analyze it? It will make it much easier for me to look at overall functionality.

kryzys

Wildpjw What documentation would you like?

kryzys

After some reconsideration I think that it is indeed a protocol issue. I think this "H" connector is for vertical (tesla style) units, which replace original A/C panel buttons/knobs. In my situation the only way to use these buttons is canbus. Later I'll upload a video showing canbus output when other console buttons are pressed.

Could someone with a greater knowledge tell me if Raise can box filters bus messages? Is there any way to get all raw messages from the bus (without any other external hardware)?
Can someone put me in touch with the technical person who is responsible for this device and cables?

Wildpjw

Just send me all schematics, ie. Harness pinout, raise canbus decoder pinouts. Whatever you have regarding this and I will sift through and compare to my setup. The only thing not working on mine is rear defrost and airbag light.....both of which I can live without.
My background is electronic engineering but it is very difficult to assist if I don't have documentation.

kryzys

Wildpjw I can send you a few docs... let me know how?

Wildpjw

kryzys wildpjw@gmail.com

kryzys

Guys @dudu-lai, @DUDU-Meng can someone help me with this. Summer is comming and my A/C is stuck at 23C and windshield defroster 😐 Here is a video showing all buttons work (giving canbus feedback) except A/C: canbus buttons.

Please tell me if vehicle settings are okay? Because when I look at these settings in other cars, they are much more complex. Is my car so poorly supported?

I've also read somewhere (XDA forum) that updating MCU and/or canbus decoder should/could be done. Is this possible and could it be helpful?

And what about canbus log files? Is something broken? Because they are not created in my unit. Maybe there will be more information about my issue...

dudu-lai

kryzys Bro, I'm sorry I don't have a better idea in terms of displaying the AC info. Maybe the cables you are using are not suitable for your car as there are a lot of wiring harnesses that are wrong and you went through a lot of trouble to get them corrected.
The CANBUS may be able to get the A/C info but it won't affect the A/C because the car has a physical button that controls the A/C, if that button doesn't control the A/C at all, remove the CANBUS box and try it. It could be something else.

kryzys

dudu-lai A/C and other media buttons are connected by the same wires (M_CAN). As part of them work, so I think this is a protocol or some settings issue. What about my other questions:

MCU / canbus box update - could it help? Is MCU firmware somehow related to canbus?
Canbus log files? How to get these logs?
My Vehicle settings - could someone assure me that they are correct?
Is there any possibility to contact someone from Raise to resolve these issues.

dudu-lai

kryzys You have recorded CANBUS logs before, and there is no data for air conditioning information
MCU has nothing to do with it, if you have the CANBUS upgrade file, you can try to upgrade it

kryzys

dudu-lai I've recorder only screen output, I cannot find any files. I do not know if there are more information in these files than on the screen. I was looking for canBusALog directory...
And if we can somehow sniff all canbus messages, not only these supported by canbus box. I suspect that A/C messages are somehow not supported. That is why I would like to contact with someone from Raise... could you help me with it?

dudu-lai

kryzys The CANBUSlog catalog doesn't have any more information, just screen-scrolling data presented in a different way
Do you use WeChat?

kryzys

dudu-lai I don't, but if it is necessary, I could install it... just let me know

Right now I'm looking for some can bus messages sniffer, to debug M_CAN (media can in my car) and find right messages to control my A/C. It would be easier if I could catch the whole communication right in my headunit.

dudu-lai

kryzys
Are you trying to use a CAN data collector? When it is connected to the car CAN bus there will be very much other information interfering with your ability to find the correct AC ID, which is very time and effort intensive, which is difficult.

kryzys

dudu-lai I know that there will be a ton of other messages flowing in the bus. But I do not want to surrender. I like your headunit VERY MUCH and I want to make it work... for me and other Pathfinder users 😉

What about this WeChat? Would it be helpful in communication with some technical person from Raise?

kryzys

dudu-lai I have logs for all A/C buttons and CAN communication in my car, I analyzed them a bit and I think I have CAN messages for A/C buttons that do not work with my CANbus decoder. Please tell me who should I contact to solve the remaining problems?

Should I start a new topic for these problems?

kryzys

Hi, I've just found detailed information about A/C control in my Nissan. I don't know why I didn't find this information earlier: https://github.com/rynbrd/r51-ecu/blob/master/docs/climate.md

At first glance, it is clear that the A/C operation should be initialized:
https://github.com/rynbrd/r51-ecu/blob/master/docs/climate.md#unit-initialization
It's possible that the problem lies exactly here...

As I've already bought CAN sniffer tool, I'll try to confirm these information.

I hope it will be helpful and someone from Raise will be able to update canbus box firmware to support my car

kryzys

dudu-lai I,ve bought standard 40x10 fan, but it turned out that it does NOT fit... nobody has said that it should be WITHOUT frame 🙁

It turned out that it is working, but a small plastic element was broken and it was causing noise. This element held the wires so they wouldn't fall onto the fan blades.

dudu-lai

kryzys There is no good solution. Contact Raise engineers to see if they can help.

« Previous Page Next Page »