R
Rigstud

  • 5 Aug
  • Joined 28 Apr
  • bobferg

    I have been trying to install the supplied Simple Soft canbus on my 2019 Ducato...though it does not have a Ducato option on there...I tried a few different options under Fiat...but with no success..

    Any ideas..??

    Thanks.

    • Thanks for the info above...very informative..!!

      I will bare this in mind when making my install.

      Thanks

    • ManOfScience

      Hi...I've not fitted the camera system as yet.

      I have only just pulled out the original xzent stereo and now working out what wires go where....unfortunately for me...my wiring loom is not standard...so need to work it all out.

      As soon as I get this done...than I will start to run the wires for the cameras..I will let you know when I get to that stage.

      Are you doing the same on a Fiat Ducato..??

      • Hi,

        Thanks for your reply.

        Does fitting at any particular height matter.?? Do all 4 cameras need to be fitted at the same height or can they all be different.

        The front mounted camera will be fitted in the in-take grill. My existing reverse camera is fitted on the top which is approximately 2.2m high...do the side cameras need to be fit at any particular height or can they all be at fitted at different heights with no issues in performance etc..

        Poc of the existing reverse camera in the rear moulding.

        • I recently purchased the Dudu7 with the 360 camera system…direct from Mekede Mall.

          Can any tell me if they have installed the 360 camera system in a Fiat Ducato based chassis motor home. The motor home is 7.5mtrs in length.

          I understand on a regular car the side cameras are installed in the wing mirrors…though with the motor home being longer…would the side camera be positioned in the wing mirrors or does it need to be positioned else where..?

          Appreciate any advice or guidance..

          Has anyone actually had this system installed on a Motorhome.?

          Thanks.

          • Hi All,

            I have recently purchased the Dudu7 with a 360 camera system and the tyre pressure monitoring system.

            As most of you...I bought the system to have installed in my Roller Team 740 T Line motor home which is a Fiat Ducato 2019.

            I bought the system direct from the Mekede mall.

            I am hoping someone in the group could point me in the right direction with regards to;

            1). setting up the canbus system (Mekede have included this in the kit)

            2). Where have some of you positioned the side camera's for the 360 system...on a regular car it is positioned in the wing mirrors...is it the same for a motor home..??

            Any advice will be much appreciated.