• DUDU OS
  • DUDU7 RCA Pre-Out voltage

I'm planning on a SQ build and was wondering what RCA Pre-Out voltage does DUDU7 provide using the RCA cable?

Also, RCA cable does have the subwoofer cable, my second question is, does subwoofer control works as in Pioneer units?

1.79v at max volume, clean signal

Sub output needs to be at +10 in settings/sound/advanced to match 1.78 of front and rear. For sq I’d get a line driver at minimum or go dsp

    Kasper618 would optical to RCA converter give clean signal at max volume?

      abidali I use the optical output, connected to the Helix M Six DSP. The disadvantage of the DUDU7 optical output is that it is quite a bit quieter than the RCA.

        I havent personally used the optical out yet. I run an Audio Control matrix plus with mine and it made a world of difference. With the shallow mount of dudu I was able to get some 1.5’ rcas, and one splitter for the single sub out and fit it right behind the du. I also found the internal EQ doesn’t like to be pushed more than +3 or so db on some frequencies so if tuning a curve, I would take away instead of add then compensate with line driver.

        I did have this problem before on another Android headunit and did solder the RCA outputs directly to the DSP chip then the signal was 100%. This RCA signal is not usable for me so I will open the unit and look if a can do this again will post a picture of the solution.

          25 days later

          DieselManiac
          Sound output via RCA is pretty poor quality. Not something that you expect from a product like Dudu7, it is more like a cheap $100 android head unit. Luckily my amp could take speaker level inputs and that sound pretty good.

          Robin
          How did you sort out the quieter audio via optical? Can anything be done from the Dudu7 Headunit? Or by tweaking the gains on DSP/external amp?

            Robin
            What you mean quieter?
            Sound softer?

            SQ build!? ... best option is digital to your DSP amplifier.

            Just use the optical connection to your DSP amplifier.

            Robin any idea why optical is a bit quieter? Have I missed a setting?

            • Edited

            mattanto There is not many options.
            I increased the volume in Sound - Settings - Sound Balance Settings - Music (to +10)

            a month later

            Using rca FL,FR,RL,RR and sub into helix dsp amp then output to speaker and subwoofer.
            Will I get a good SQ result?