• HW Installation Support

  • SWC button no response after sleep

Abogrhen
When the buttons are out of order, does the number of each button change after re-learning compared to the last time? Normally, the number is fixed no matter how many times it is learned, but if it changes, it may be due to a change in the resistance of the steering wheel.

      dudu-lai
      No
      They stay the same
      Also the resistance numbers
      Doesn't change


          Abogrhen This has never happened before, assuming it's a software issue and the learn icon doesn't disappear but doesn't work when pressed. Assuming the SWC button doesn't work, but nothing was done, just relearned and then worked again, being able to learn on proves the cable connection is fine, confusing me.

              dudu-lai
              Yah
              on thing i can think of
              Is that some services that handled this goes to sleep and don't work again

              But on "canbus" cars the canbus wake the service up so that doesn't happen to them

                  Abogrhen Settings - Automotive - Startup Settings - Set to off when engine is off, is this ok?

                      dudu-lai
                      This is the current setup
                      Should i try to set it as shutdown ?

                        I tried the shutdown setting
                        But no difference

                        Try using a CANBUS bus box to see if that solves the problem.

                          dudu-lai
                          Thanks for the suggestion
                          But as far as I know
                          There is no canbus available for my car
                          (Hyundai elantra 2010 )

                          As it older model with standard ISO connection as the car came with JVC unit from factory and later on upgrade it to Kenwood unit
                          Before moving to android head unit
                          And all of them worked with SWC button

                          And as the buttons work fine when programmed it's clearly a software bug

                          Any way i have ordered my self the dudu Bluetooth remote to solve the problem for now

                          But i hope that you can flag this problem and try to get into it later on

                            11 days later

                            hy, im driving also hyundai ix35, 2012 (year of production - car model without CANBUS), only cable, i have question regarding head lights ON/OFF, doors ON/OFF (it shows on car command displey/desktop)...does lights on/off, door on/off only works with CNBUS, or it support some car models without CANBUS?? my swc works solid, only sometimes it dont show volume up/down graphic on screen, and and some buttons are slow to response but i think it is related to usage during years

                              obelix80

                              It is not possible that your car doesn' t have CANbus.
                              CANbus is one of five protocols in OBD-II
                              2001: The European Union makes EOBD mandatory for all gasoline (petrol) vehicles sold in the European Union, starting in MY2001 (see European emission standards Directive 98/69/EC).
                              2003: The European Union makes EOBD mandatory for all diesel vehicles sold in the European Union
                              2008: All cars sold in the United States are required to use the ISO 15765-4 signaling standard (a variant of the Controller Area Network (CAN) bus).

                              See also ISO 15765-4.3:2001 “Road Vehicles-Diagnostics on Controller Area Network (CAN)—Part 4: Requirements for emission-related systems”, (December 14, 2001)

                              So, by law, worldwide, every car has to have CANbus for control of emissions.
                              Actually your car does not have "a" canbus, Most cars have 5-9 CANbuses connected to the several systems in the car.

                              What you proablably mean is that you ordered a unit without CANbus decoder.

                                  surfer63
                                  Hi although you're replying to @obelix80
                                  Your are correct that all cars have obd2 protocol connection nowadays

                                  What we mean here is newer cars have a connection to the car radio that make it (smart) by getting some information from other systems

                                  Like if the door is open or if the head light is turned on and many more
                                  So need to decode the signal
                                  So you use a canbus decoder

                                  Unfortunately some economy older
                                  Japanese - Korean cars think 2015 and older do not have that

                                  And use simple ISO radio connections that not communicating with car at this level

                                  My car came originally with an aftermarket style one din stereo

                                      OK. I understand.
                                      Your car simply does not have the CANbus Hi Lo wires (and some more) connected into the ISO plug, or si it seems.

                                      Is it not possible via Hyundai or some other source to get an extended ISO plug?

                                        surfer63
                                        I can't comment about the other guy

                                        But for me
                                        Adapter harness is pluged in
                                        and have the prober connection

                                        And it communicating with head unit

                                        Also i have used an older unit and it works fine there

                                        My only problem with this unit
                                        Is after programming the key for the steering wheel
                                        They work fine
                                        until reboot or restart or deep sleep
                                        They stop working

                                        For now i have installed a Bluetooth remote control on the steering wheel that i got from dudu

                                        I hope they can fix the issue

                                          Abogrhen well some hyundai ix35 got canbus depending what originaly came headunit...some units come with biger screens, navigation, revrsecameras etc...my were simple fm radio, cd unit and bluetooth conection for phone...so you think it cant show without canbus decoder

                                            surfer63

                                            this is cable foe my car

                                                obelix80
                                                I do understand now. Your cable only contains the radio conection. It is not a complete ISO harness for all the other functionality.

                                                Could this work for your ix35?
                                                https://vi.aliexpress.com/item/1005005185014341.html?spm=a2g0o.productlist.main.15.3c4b28b8jiYNPY&algo_pvid=3962660a-4acb-47f9-b2d5-ef346f77d042&algo_exp_id=3962660a-4acb-47f9-b2d5-ef346f77d042-7&pdp_npi=4%40dis%21EUR%2110.13%217.09%21%21%2174.93%2152.45%21%402103864c17347200115167780efe00%2112000032019533058%21sea%21NL%21194906461%21ACX&curPageLogUid=89pElQQ5Bhap&utparam-url=scene%3Asearch%7Cquery_from%3A

                                                @Abogrhen
                                                I could not find anything for your elantra 2010

                                                    surfer63 or this one, description said it is responsible for comunicating about lights, acc, doors etcc... https://vi.aliexpress.com/item/1005006686987452.html?pdp_npi=4%40dis%21BAM%21BAM%2079.94%21BAM%2063.95%21%21%21308.64%21246.91%21%40212a6e3217347333249763523e79ce%2112000038015784139%21sh%21BA%21728591981%21X&spm=a2g0o.store_pc_allItems_or_groupList.new_all_items_2008437776057.1005006686987452&gatewayAdapt=glo2vnm#nav-review

                                                    but im not sure, i asked seller, and every seller i asked said to me to send him picture of my original car radio unit, and when i send him he said that they dont have canbus decoder for my car...so i find it weird....dont know why it is importanat original car headunit

                                                        obelix80
                                                        Did you ask your Hyundai dealer if there is a complete ISO harness available?
                                                        There are also many hyundai forums and clubs on the internet. Maybe in your own language/country. Did you ask there if users know about a more complete ISO harness?