gismo When I try to order, I can't imagine it's an installation error or a hardware defect. I'll explain why as follows.
2x VW T5.2 and 2 Dudu7, and a total of 5 or 6 CAN-Bus boxes. If it was an installation error, why does the problem occur in both cars? My brother-in-law is an automotive mechatronics engineer, and I also repair and tune cars.I think we both know exactly what we're doing and of course we checked all the cables and connections first. In addition, we tried out three Canbus boxes from Raise called VW RZ-58.It works for a while and then suddenly either the steering wheel remote control fails or everything that has to do with Canbus. Furthermore, an unknown CANbus box appears every now and then. For whatever reason.
Furthermore, I read exactly the same problem in German car hi-fi forums, but this one seems to be a Skoda. It's not meant to be an attack at all. Of course, I understand that there could be some problems. Yes, I know I should take a report. Unfortunately, I haven't gotten around to it yet, as I have a lot to do in my private life and am not always at my car. And my brother-in-law's situation is similar.
.But what I can say is, there must be a problem somewhere. As I already mentioned, I'm having the same problem. And if it's a cable issue, or a connection issue. Then the error shouldn't occur when the car is stationary and only the ignition is on. When driving, I can see it happening due to vibration, etc. But in my case, the car was stationary. The engine wasn't even running. I just sat there to understand the Dudu7 a little and set it up. And suddenly, even though I hadn't done anything to the CAN bus, the door open indicator no longer worked. No more turn signal animations. Everything that has to do with the CAN bus.
