CAN bus not fully functional

Ryotaro

I can't get any information from the CAN bus.
The home widget can only show door open/closed.
Is it possible to get speed, RPM, water temperature, etc.?
The CAN box I'm using is "OD-LM-01".

wwest2

Ryotaro

That depends on which car model you have. There are some cars that are fully supported, some are not.

caolz

Ryotaro
Your CAN Bus Decoder brand is OD.
OD and Raise should be from the same manufacturer.
Setup>Vehicle>CANBUS>CANBUS>Select CANBUS, CANBUS box: RZC(Raize)
Then choose Can brand, Model and CANBUS based on your vehicle type.

Ryotaro

caolz
The vehicle used is a Suzuki Swift (2010-2017).

Initially, I specified "OD → SUZUKI → ALL → OD".

However, when I tried to specify Raize, there was no protocol that supported my vehicle.

What should I do in this case?

Additional information
The cable of the CAN box is connected to the OBD2 port.

Therefore, if I select a protocol that implements CAN communication according to the OBD2 specification, will it work?

I used Google Translate to translate into English, so I hope my intention is conveyed correctly.

dudu-lai

Ryotaro OD manufacturer information labeled OD-LM-01 model protocol box. You need to select rzc-vw-pq-low, after selecting it, open DUDU's Vehicle Information APP to see if there is information displayed, if not, it means the OD CANBUS protocol box is not reading the information of vehicle speed/water temperature, etc. It is recommended that you replace the CANBUS protocol box with one from another manufacturer!

Ryotaro

dudu-lai
The problem has been solved. Thank you.

JhonnyD

Ryotaro so you get all information now?

I have a vitara and would like to try it

JayVeloster

Ryotaro What did you do to solve the problem?

Ryotaro

JhonnyD
Some information was not available.
The following information could be verified.
Speed, RPM, door condition, seatbelt condition, boot condition and parking brake condition.

Ryotaro

JayVeloster
The CAN bus protocol has been configured as follows.
「RZC→Volkswagen→PQ →Low」