Ryotaro OD manufacturer information labeled OD-LM-01 model protocol box. You need to select rzc-vw-pq-low, after selecting it, open DUDU's Vehicle Information APP to see if there is information displayed, if not, it means the OD CANBUS protocol box is not reading the information of vehicle speed/water temperature, etc. It is recommended that you replace the CANBUS protocol box with one from another manufacturer!
CAN bus not fully functional
Ryotaro What did you do to solve the problem?
JayVeloster
The CAN bus protocol has been configured as follows.
「RZC→Volkswagen→PQ →Low」
Unfortunately for Vitara it doesn't work.
Is there a way to find out if the head unit get canbus signals from the car?
Und dann ist es möglich herauszufinden was man einstellen muss?
- Edited
radzi11
Dynamic guidelines are not working in my environment either.
I guess that's because the Swift's CAN decoder gets the CAN signal from the OBD2 coupler, and the information it gets from there doesn't include steering angle information, so it doesn't work. (It's just my guess that steering angle information isn't included.)
Or, the steering angle request code may not be sent from the head unit, so the information cannot be obtained. (Because OBD2 cannot obtain information unless a request code is sent.)