gismo and yet my newly purchased vLinker MC+ wont connect to my DuDu 7 Head unit. I have a collection of 5 now and none work.
Best OBDII?
- Edited
johnyfalco it's even officially supported now (v3.6 release). Mine connects fine, either in the devices settings or in the Android BT settings of my Dudu7. On older DuduOS versions, only the Android BT settings worked.
johnyfalco What's more, Vgate iCar Pro 2S also works on the vLinker MC+ setting. At first it had problems reading fuel level or coolant temperature, but after a few starts everything works regularly. Connecting to OBD is very easy. Can you show how you try to connect OBD to DuduOS?
Вам необходимо в пункте BT Phone поменять пароль на тот который требует ваш адаптер.
Затем в пункте OBD выбрать ELM 327, и ниже выбрать адаптер.
Важно. Адаптер не должен быть сопряжён, ни с чем. Ни с андройдом ни с DUDU в меню BT.
После чего у меня начали отображаться все значения.
Получилось просто случайно. я тоже пытался его принудительно сопрячь.
5 days later
i have like this on my dudu7.
Does this mean it working?
gismo which model do you use? I just update to 3.6 and would like add an OBD II (as my canbus doesn't read car data)
mircondini vGate vLinker MC+
5 days later
Got vGate vLinker MC+ and DUDU7 detect it (but not still shown on the status bar
) ... but, the only values readable are fuel, H2O and what else? If I would like use OBDII even with an app (on DUDU7 or phone) how to proceed?
mircondini Du musst ein Canbus Protokoll einstellen, egal welcher.
Dann wird etwas angezeigt.
Ich weiß nicht wieso.
JhonnyD I already have a canbus protocol
5 days later
gismo Hi, I bought the same OBD, but I need to reconnect every time and only water temerature had shown. Any suggestion?
- Edited
mircondini it connects automatically for me. The data you see depends on the car and DuduOS integration. For my VW, I see more data. I don't use it with the DuduOS functionality at the moment though, because DuduOS acts like a (better) trip computer and I'm more interested in detailed information e.g. on clutch temperatures and DPF status, so I'm using it with Carscanner/VAG-DPF again. If I do that, the DuduOS functionality stops of course, as the (any) OBD Adapter can only serve one client (i.e. app) at a time.
PS: In case of connection issues, make sure you have the latest firmware on the adapter. See its manual, you need to update using their app.
4 days later
- Edited
dudu-langzi I did what you said, I bind it, it said connected but nothing happen in the widget that said energy flow
10 days later
- Edited
I would like to be able to view data on the Dudu7 engine as well. What hardware works perfectly with the Dudu7? And which software can you recommend?
I am interested in Oil Temperature, Oil Pressure, Boost Pressure etc
I'm looking for this for a VW T5.2
Blackbandt
Regarding device:
For Dudu - anything which shows itself on Bluetooth as named "OBDII" - for instance this one:
https://www.ebay.co.uk/itm/154515419444 - Yunsun or Junsun ones are fine. Others like smaller and cheaper indentify themselves as "Cafu" or something else. Dudu doesn't see them.
You won't be able to see any details except coolant temp and speed and revs with Dudu widget.
However, you can use on Dudu separate app, which is called Torque Pro (a few dollars for the paid version). Then as a separate app on Dudu unit you have access to hundreds of parameters.
For VW you need to add so called extended PIDs to Torque app. It's fairly easy, just take a look here:
https://www.vwroc.com/forums/topic/32235-any-experienced-torque-pro-users-on-the-forum/
Since new version of Torque you can't add these files to .torque folder as it doesn't pick up. Now, these folders are under Android > Data > com.prowl (that is torque app) and then same - extendedpids and vehicles.
Hope this helps