• Update Bulletin
  • DUDUOS weekly update newsletter!240916

ahmed68 In the dudu appstore you must go to the downloads & updates section and you'll find some new apps to download

observer2 Have you read what is written above? Read carefully and you’ll have your answers. You must enable “beta” app access in Dudu store. And after check the section from Dudu appstore named “downloads and updates”. There you’ll find some new versions of the apps. This is not a firmware update.

    observer2 Man, I told you to read the posts above. These “weekly” updates are not firmware updates but app updates. So has nothing to do with the firmware update. Please take your time to read the posts above throughly.

    MihaiFlorin
    Seems like I don't have this option on the bottom of the Factory Settings -> Others menu? Is it limited to DUDU devices? I'm on DUDU6 Beta on Mekede M6 Plus 3D.
    I installed the Vehicle Information (Beta) but I also don't get the display above. Only the same screen with a couple icons that I also get from another app (can't remember the name).

    This is my system

      MihaiFlorin
      Indeed. The option in the menu showed up after installing the DuduAuto Pro update. Unfortunately it's of no use for the car I'm using the unit in. Too old 2009 Audi TTS.

      For those not seeing the option, enable the Beta App Access as mentioned before and install the DuduAuto Pro from the unit's Appstore

        YAOXILONG unmarked the discussion as super sticky.

        suicidalguitar
        Did all that but there is still no detail vehicles showing. That's all I can see. Beta testing app is on and Dudu Auto pro is installed.
        I can't upload pictures now but both I the app Vehicle Details
        and in the settings under vehicle I can't see those extra features.

          HondaCivicDriver
          I can't see them either. I assumed that's because the car/canbus does not support it. But now that I'm thinking a bit more about it, it doesn't make much sense. It should show that screen anyway, even if without any values.
          I'll take a look into's @MihaiFlorin tip.

            suicidalguitar Make a photo of your about device details. @HondaCivicDriver And a photo of what you see. If the option is enabled and you cannot see nothing on that screen is because your canbus is not supported. The devs are working on implementing more vehicles. But it won't work on every vehicle. More details are always good. Like car, manufacturing year, canbus type and a photo about your device details.

              I could enable the option as shown above. 108 is the necessary password for factory settings.
              My bad I overlooked it before.
              But yes, it's also depending on the model and can bus support, so I can't control my AC and neither do I see any car positioning information with angles and so on.