[Bug Feedback] Problem with A/C Control and Navbar (Peugeot 308 T9)

DUDU-Meng

Geruda32
All other issues have been resolved, and there is also a problem where the sleep wake-up air volume is 0 but still displays 1, right?
Sleep.

Geruda32

DUDU-Meng
Hi,
Yes, after couples of testing, i can confirm issue is resolved for A/C Control, many thanks !

For air information in navbar (and after verification, in A/C control panel too), when i go under 1, air correctly turn off, but still displaying 1 instead of 0.
Same behavior in A/C Control Panel:

Displaying this:

Instead of this:

DUDU-Meng

Geruda32 For this last issue, please print the hoverlog and txt textlog again.
Shooting the stock A/C display and the dudu7's display after hibernation wakeup Shooting them both in the same frame at the same time.

Geruda32

DUDU-Meng
Hi,
CANBUS log:

log-2025-07-31-0.7z

1kB

Video of Stock A/C Display directly after hibernation (with log print on screen):
https://drive.google.com/file/d/1N70PPo8OzXBkwMFpYRr4VDmzSv4uBQPV/view?usp=sharing

And another video when i try to go under 0 in A/C Control panel (with log print on screen):
https://drive.google.com/file/d/1w9N-ivqy5uIV6JyhHyVjKh_nMpAXxsJP/view?usp=sharing

In 2nd video, the "OFF" button for A/C does nothing.

Geruda32

And also (not related to this issue), same issue with distorded icons in status bar:

DUDU-Meng

Okay, let's analyze the logs first

Geruda32

DUDU-Meng
Hi ,
Any news for navbar issues ?
Thanks

DUDU-Meng

Geruda32
Does your car have physical buttons to adjust the air conditioning?
The lowest value returned by the CANbox message is 1.
We are still testing the sleep/wake-up issue. I will notify you as soon as I have any news.

Geruda32

DUDU-Meng
Hi,
No, Peugeot 308 T9 has only front/rear defrost and air recycling button, all others air control is on the unit (like the stock unit).
For the other problem, no issues for now, working perfectly

DUDU-Meng

Geruda32
Navigation bar issues after waking from sleep mode Install this to test it out, it should be fixed.
https://drive.google.com/open?id=1JRzT2KH3D-j26BCTd9gRR-93wNous_jS&usp=drive_fs

DUDU-Meng

Geruda32
This is a fix for the issue where the airflow is reduced to 0 but still displays 1. Install and test it.

https://drive.google.com/open?id=1uOS0AzcB2kolFQhMfzLpHffnoZvb2Cs7&usp=drive_fs

Geruda32

DUDU-Meng
Thanks, i'll try and i come back for results 😉

Geruda32

DUDU-Meng
Hi
After test, all working good, nice work 🙂
Thank you very much for your help.

I have another request for Peugeot 3008, i'll open new thread for explaining (losing "automatic tilt-down" of the side mirror when reversing).

Geruda32

DUDU-Meng
Hi, feedback after 2 weeks:
Working much better than before !

But sometimes, still have values disappearing.
After several tests, it seems this happens consistently in those conditions.

After a short standby period (random)
car enters energy-saving mode (next start, values disappears randomly too)

It looks like the head unit loses access to the climate control data temporarily

DUDU-Meng

Geruda32
Are there any problems with the navigation bar air conditioning display?

Geruda32

DUDU-Meng
Hi,
No problem with navigation bar control and display.
Just sometimes, in specific condition, values disappears and can’t control temp from navbar (same as the beginning).
Most of the time, it work perfectly.

Geruda32

DUDU-Meng
Hi,
Updated to latest v20250829, I still get sometimes, in specific conditions, unable to change A/C Values with Navbar, same issue than first post:

But this issue appears only after a short standby period (for example, i cut off engine/ACC, and after 5 minutes, no values after turn on ACC (random)).

DUDU-Meng

Geruda32
Factory Settings - Print CAN Log to TXT File
Once this issue occurs, do not press any physical buttons on the air conditioner. Upload this TXT file directly here.

« Previous Page