DUDUOS 3.6 Beta5: Fine-Tuned Performance and Enhanced Stability 250430

wybitny2

Kamilelvis Sprawdziłeś czy czasem coś ci się nie zmieniło w ustawieniach, albo czy czasem przypadkiem zbieg okoliczności coś z kablami albo kamerą.

Slavus

Kamilelvis a spróbuj w ustawieniach kamery zajrzeć czy masz zaznaczoną opcję "Akcesoryjna kamera cofania" i sprawdź jak ustawiona AVHD czy TVI? Raz coś kombinowałem i też chwilę kamery nie było

Kamilelvis

Slavus właśnie nic nie zmieniałem. Dzisiaj rano jak odpaliłem auto to działało. Niestety są większe zakłócenia na ekranie niż wcześniej. Nie mam pojęcia co jest przyczyną że nie działała a dzisiaj sama z siebie działa 😅

RioG

YAOXILONG Hello! Where do I find the Bluetooth microphone gain adjustment feature please? I can't see it in developer options.

DUDU-Meng

RioG
Setup/Lab/Open EDV

RioG

DUDU-Meng Found it! Not as described on my device but this is where I located it.
Settings > More Features > Phone (scroll down to find the microphone and speaker gain) 👌

RioG

Still not there 🤦

JhonnyD

RioG DUDU7? Da muss man es unter DEV aktivieren. Dann erscheint es in dem von Dir genanntenm Menüpunkt.

Slavus

Kamilelvis miałem podobnie na poprzedniej wersji zdaje się i też mam podobnie z zakłóceniami. Czasem jak pierwszy raz wrzucę wsteczny, obraz jest prawie czarno-biały i za chwilę nabiera kolorów. Na 3.5 nie było takich problemów.

kolarov

pophitpro
And on my DUDU5/6(7862) - 4/64 it's the same since the 3rd beta version and it's a bit annoying. I thought it was from a weak battery, but it's definitely not from that.

pophitpro

kolarov I recently replaced the car battery, and the voltage doesn’t drop below 12.6 volts overnight. So it’s definitely not because of the battery. DUDUAUTO How can I fix this?

RioG

JhonnyD Yes, DUDU7 👌

surfer63

pophitpro & @kolarov

The FYT firmware automatically kills unnecessary background apps when going into deep sleep.
Check if you every now and then use an app that makes your unit reboot instead of going into deep sleep.
Probably this app sets a "wake lock" preventing the FYT software to go into deep sleep, and sometimes the FYT software can't even close/kill the app upon going into deep sleep.
As not to drain the battery, because that "wake lock" program will drain your battery in 2-3 days, the unit shuts itself off after x minutes.
It is not a phone. When not being able to go into deep-sleep the "non-Android" hardware like AMP(lifyer), DSP, (USB) externals will make your unit continue to use ~ 0,4 Ampere or even more.
You should check that and prevent using these apps.

kolarov

surfer63
Thanks for your advice.
The only thing I have plugged in is a USB flash drive with music, but it always sits inside and before the 3rd beta version the media would not turn off. The only thing I can think of and will try later is that around then I had AIMP player loaded on one of the windows on the home screen. I will turn off the flash drive and see if it stops.
The only "non-Android" application I use is NavRadio+, which many users (I think even you) use, but have not complained.

kolarov

surfer63
I tried removing the flash drive, turning off the specified applications in PIP, but unfortunately the problem persists. The only external device that is still plugged in is a mobile data SIM card, but it shouldn't be one of them.
Any advice on how to find the app that is preventing FYT from going into deep sleep?

afanguisaca

Existe un problemas con la `PIP de Waze que a veces se queda con la pantalla en negro y a su vez cuando se abre como aplicacion normal no se carga y se queda de igual manera en pantalla negra.

HaNaBi

I installed the DUDU7 13.3-inch unit.
When it was first installed, the firmware version was 241222. At that time, the device’s screen brightness and theme were properly linked to the car’s headlight switch.
However, after updating to version 3.6 Beta 4, this light-linking feature no longer works.
Would it work again if I downgrade the firmware back to the previous version?
Also, during the update, I did not include the factory reset (initialization) file.

RaZ

Joshua-Pech
It's not really like that. The option I'm looking for is to be able to disable a single speaker, and the available options in the settings are to shift the sound output by zones (for example, output to the front speakers, to the rear speakers, or output to a single speaker), but there's no way to disable a single speaker while the others continue to function normally.

liamstears

DUDU-Meng There is bluetooth firmware update?

DUDU-Meng

liamstears System Upgrade App/More Upgrades.
You can choose the latest Bluetooth firmware to download and upgrade

Marv2525

Please add the next update info for 2014 Ford fusion thank you

liamstears

DUDU-Meng

Thanks

What exactly is "Added MCU key learning functionality in factory settings for convenient setup"

I can't find it...

Marv2525

DUDU-Meng can you point me in the right direction? Do I find that on the dudu7 head unit in apps? Thank you dudu meng

« Previous Page Next Page »