FRONT CAMERA WIRING HARNESS

BigyUU

Hi all, I am an installer and I purchased a number of DUDU7 Auto head units, with some installed.
I have tried to get a front camera working to no avail.
After researching here and on wiki.dudu-auto I have discovered that there is a cable that connects in to the Protocol Serial Use with Can-Bus connection.
Is there anywhere to purchase this cable? Please see attached.
From reading other posts and discussions it would appear that some people received the wiring harness / cable, however I did not.
Apart from my customers being very frustrated, I too at am a loss as to where to get this wiring harness / cable. Any help would be appreciated.

ciubaka

BigyUU Generally there's a dedicated front camera with special plug built-in. You could use a canbox plug and add some 3 pins for the camera (use for example CVBS RCA input from the other 20-pin plug) but you would need also to power the camera somehow. The other thing is that camera needs to have 1080N format (not 1080P).

Chubaka885

BigyUU это провод для фронтальной камеры идет в комплекте с фронтальной камерой от DUDU.
Кроме того, как уже написал выше ciubaka, вы не сможете подключить любую камеру в этот разъем. Например стандартную заднюю или переднюю. Потому что для работы на этом разъеме требуется камера стандарта 1080N.

adeebulrehman

Chubaka885 please advise front camera pinout.

Mikescotland

adeebulrehman https://wiki.dudu-auto.com/en/%E5%AE%89%E8%A3%85%E6%95%99%E7%A8%8B/%E8%BD%A6%E6%9C%BA%E5%AE%9A%E4%B9%89%E5%9B%BE
plug C, C1 ground, C6 Video in. You can also take 12V from this socket but probably easier would be take 12V somewhere closer to the camera.
The camera must be AHD1080N (NTSC format).
Connector is PAD SPH 2.0 8 pins. I found and bought it here
I just found this on AliExpress:
￡1.96 | 4 6 8 10 12 16 20 24 32 Pin PAD SPH 2.0 Car Sockets Modified DIY Connector Electrical Cable for Android Radio Navi Multimedia
https://a.aliexpress.com/_Eu7faz4

adeebulrehman

Mikescotland Thanks Sir also guide me regarding F1, F3 & F5, Can i connect OBD2 terminal here or is meant for something else.

Mikescotland

adeebulrehman no, you cannot. Although it's marked as canbus 2, it was said it's an error, this is inactive in Dudu. Canbus only on C.

adeebulrehman

Mikescotland It work like a charm, I connected OBD2 pin no 6 and 14 directly to F1 and F3.