• DUDU OS

  • 🚗 Important Notice: Vehicle Information and Upcoming Plans 🚗

Vehicle: fiat tipo 2017
Canbus: FT-SS-05/RP5-FT-003 simple soft

Tswire
Any idea why Canbus says unknown? I have the Simplify box specific for Nissan Qashqai/xtrail 2020 +

    I would be happy if my car also comes into the plan.

    Vehicle: Ford Mondeo Mk4 (BA7) 2007-2010
    Canbus: Hiworld

    best regards

    BMW E90 , 328XI , Year 2010
    Canbus: Lz(Hz)/Luzheng HW: V5
    DUDU7

    • Hhonoya

      • Post #54
      • Edited
      • This post is in 한국어

      Vehicle = KIA Niro 2017
      Canbox = Rise G-HYK-RZ-63

      Product: DUDU7 (7870) running the latest firmware (2411118)

      Vehicle:BMW 7 series, F02


      JAC S3 2018
      CANBUS : Raize
      RZ-JAC04

      Suzuki Jimny 2022
      CANBUS: OD-LM-01

      Product: DUDU6 ver.20241222
      Vehicle : hyundai veracruz
      Canbus : hiworld-hyundai HYF1.20

      Can’t wait to use it! Thankss

      CAN: Raise CAN-adapter
      Car: VW Sharan 7M from 2009.

      Steeringwheel Multimedia buttons are working, nothing more, though.

      The newer Sharans >2010 are already in the list.

      CAN-bus decoder: OD-OLO-02, HW: AV1, SW: V6, 241109:

      Vehicle: Volvo XC90 V8 from 2008

      I am using the corresponding CANbus decoder options in my DUDU7 (OD - Volvo - XC90 - 2003-2014).

      Currently reverse detection, volume up and down, next, previous and answer buttons on steering wheel works. Parking sensors, speed, and other car state does not seem to get picked up by my head unit. Would love to have the parking sensors working 🙂

        edog it's likely that this and most of the other canbus posts here, are issues with the canbus interface and not DuduOS. There's not much Dudu can do to help when there is very little detail, or even if all the features were working on a previous Headunit, or working before upgrading to a Dudu unit/beta upgrade.

        For those technically able, rolling your own canbus interface through creating customized canbus interface code is possible.

          @Marchnz - Am I understanding you correctly that the OD-OLO-02 decoder referenced above likely does not have translations for the car state messages I am currently unable to pick up with the head unit?

          A few follow ups in that case:

          1. Is the interface to implement defined somewhere? Like, what do the messages that the Dudu7 head unit can understand that i need to translate to.

          2. Are there programmable canbus decoders that one could buy off the shelf and program or would one need to use an Arduino (or equivalent) with a canbus curcuit and create connectors + do wiring oneself?

          Citroen C4 II
          PSA-RZ-15

          Kia Niro 2017 DE

          Simple Soft NS-SS-04
          Nissan Note SNE-13, 2022

            whatsgoingon did it work on your non DuduOS unit? What information are we all wanting to provide the developer?

              I got a mazda cx3 2020

                Pickachu47 what happened to it

                    Marchnz Did you read the OP? We have to post canbus box an car make so they can adapt it.