DuduOS help on Teyes CC3

HAccord8

Is this something i can report as bug and ask for a solution fix?

Also what about this?

The Voice SWC set to Voice from settings does not turn on Siri when running CarPlay, rather open up Google Gemini

Also, i think i ruined it more. I tried to run this script thinking it will fix my issue but now the whole steering wheel controls are gone. I cannot set anything. The SWC from settings recognises my keys but does not save it.

I tried a system reset from Android settings. I tried re install DuduOS 6 but cannot set steering wheel controls anymore.

Please help

https://forum.dudu-auto.com/d/1111-using-siri-instead-of-gemini/32

DUDU-Meng

HAccord8
The issue where the SWC voice button fails to activate Siri after connecting to CarPlay has been resolved. Simply upgrade to the latest version. The system version released in late October will address this.

HAccord8

DUDU-Meng

mine all SWC keys have been gone. I am unable to set any key now, after trying to run that script. I tried a factory reset and tried to reinstall DuduOS6 3.6 and still unable to set anything

DUDU-Meng

HAccord8
The MCU version of CC3 differs from ours. You'll need to install the CC3 SWC app yourself to configure the buttons.

HAccord8

DUDU-Meng the buttons were working until i ran the script that i found on other post like 2 hours ago. How to undo that?

I was able to set them up from Vehicle Settings

HAccord8

DUDU-Meng mate, good news i reset it a few times, buttons started working + Siri is also working with Voice button. Very nice. 3 issues are sorted after reset.

How to raise a request to fix the intermittent border issues when navbar is disabled.?

The screen when on Carlink app running CarPlay, have borders issues sometimes from sides and sometimes from top sometimes it is fine. (I have Navbar disabled)
The Voice SWC set to Voice from settings does not turn on Siri when running CarPlay, rather open up Google Gemini. - FIXED
The screen brightness cannot be set by car lights, even though i have illumination wire connected to HU and with TeyesOS, it used to detect that. - FIXED
Launch apps on startup does not have option to enable CarLink 2.0, is that disabled? - FIXED

DUDU-Meng

HAccord8

Do not hide the navigation bar. If you need to hide it, this is the effect you'll get—there's no workaround.
The system firmware update scheduled for late October will resolve this issue.
As long as your lights are detected, you can adjust their brightness. Go to Settings > Display > Day/Night Switch Mode > Light Switch or Light Mix Mode to achieve the desired effect.
CarLink does not require auto-launch. If you enable Auto-Connect, it will automatically connect to CarPlay once it detects your iPhone's Bluetooth connection.

HAccord8

DUDU-Meng 2,3 and 4 are already resolved. Can i raise system bug with developer to have a look at it please?

DUDU-Meng

HAccord8
The first issue cannot be resolved. The layout of crplay is adjusted only once at runtime; subsequent changes to the navigation bar will not trigger a re-layout based on resolution.
You must disconnect, close CarLink, reopen it, and reconnect to resolve this.

HAccord8

DUDU-Meng i have Navbar disabled so why it still tries to leave gaps for it? Why it doesn't adjust correct resolution at runtime then?

Saburo

DUDU-Meng I have also encountered this issue. The last step you provided will temporarily resolve, but it will reoccur when I reboot the unit, even though NavBar has already been disabled.

HAccord8

Saburo I second this, it is a bit annoying as my unit has physical buttons and i don't want a navbar and prefer full screen on app and this behaviour with CarLink app is ruining the experience

DUDU-Meng

HAccord8
I've replied under your other post with the latest system connection details. You can update and test this issue again. The CarLink SDK has been updated.

HAccord8

DUDU-Meng this one? I have the latest 3.7 beta (Global_DUDU7862_2511041806_2510200925) already that i downloaded yesterday to test. Is it lastest than the one online yesterday?

https://drive.google.com/open?id=1hlKNeJoz90QZ5x8hjJqpEmSPCi5OCrlc&usp=drive_fs

DUDU-Meng

HAccord8
Version number: 20251103

Saburo

DUDU-Meng I will update to this version and test it later.

HAccord8

DUDU-Meng The one i have is the latest one compared to one you provided

v20251104

This is where i found it
https://forum.dudu-auto.com/d/2559-duduos-beta-testing-expands-to-more-devices-join-now-for-portrait-mode-support

Saburo

DUDU-Meng This link you posted in HAccord8's other post was v20251101. ( And it doesn't solve the issue)
https://forum.dudu-auto.com/d/2568-duduos-37-beta-and-car-door-animation-appears-repeatedly/4

Please provide here the correct link where we can download v20251103 you are referring to, or another latest version for the 7862 unit with the CarLink SDK updated.

HAccord8

DUDU-Meng can you please provide the link to the latest version of 3.7 the one you were referring too saying it doesn't have the door animation issue and the CarPlay resolution fix.

My current version is 3.7 - v20251104, same like the screenshot i have posted

Thank you

HAccord8

Saburo the one i found here is the next version to what @DUDU-Meng is referring to.

The version here on below link v20251104 and the one he is referring to is v20251103

The version i have has the issue too

https://forum.dudu-auto.com/d/2559-duduos-beta-testing-expands-to-more-devices-join-now-for-portrait-mode-support