DUDUOS 3.6E Official Update Now on OTA! & DUDUOS 3.7 Preview

59591

안녕하셔요 요번 3.6E정식업데이트 후
기본화면 에서 분할화면이 안되네요
그전 3.6E베타(250708)에서는 기본화면에서
분할화면이 잘되었어요 다음 3.7 업데이트시 참조해주셔요

Cywa

Please, add reversing sensors front and back to your accessories line up.

Yanoki

What exactly was changed in 360 app from the new update? I installed the update and went over the 360 app settings, but I did not see any changes? @dudu-lai @YAOXILONG

stefan35

Did the update and all is working fine for me. There is two things that I've noticed though.

Before when the CarPlay application was opening, the navigation bar was disappearing automatically, now after the update it does not. Is this something that I can re-activate from somewhere? I was not able to find this.
When using CarPlay, I have a button on the steering wheel that activates voice commands, that button before was working with Siri. Now after two updates, I don't have this functionality anymore. Is there a way to activate it somehow, any setting related to this?

Thanks.

Cywa

Since day one I install my unit CarPlay has naver work for me wirelessly only wire any fix for this?

Michalisgk

YAOXILONG

YAOXILONG
The new launcher layout working without dash cam?

Hugolo

hello,
The os 3.7 please add change the car model

AlexKidd

Perfect, new update 👍
I hope the bug with auto-discovery and auto-connect of the OBD2 Bluetooth module after the unit boots will be fixed soon.
Currently, we have to manually reconnect the OBD module in the settings after each startup of the unit.

reg66

AlexKidd
Not me, never. Always connected without issue to my Lelink2 adapter after either complete reboot or sleep-to-wake with ignition on.
Has worked fine throughout all the updates.

Lelink2 is also great because it's the only adapter I could find that, using the Lelink app, you can enable the device to power down when ignition off and power back on when you start the car - even though the OBD port is always powered whether ignition on/off. That way it doesn't drain the battery when the car is left

AlexKidd

reg66
Ok
I have the Vgate vLinker MC+ and I have to reconnect it manually after each vehicle start.

reg66

AlexKidd
What a pain. Have you tried updating BT firmware?

AlexKidd

reg66
Yes, I have last BT firmware on the unit and on de vLinker MC+ too.

Romanus

Этот вариант . НЕ УДАЛЯЕТ информацию с устройства , ранее созданые папки остаются. я делал сброс и возврат к заводским настройкам, нажимал очистить. папки остались прежние со всей информацией.
2- установки с USB не происходит. появляется дохлый андроид, пузом вверх. (красная строчка требуется ребут)

Romanus

то есть именносейчас я в автомобиле. я два раза пытался установить ЭТО новое. с USB установка не идет. ОТА обновление не удаляет файлф, на форматирует устройство при сбросе.
я сейчас устанавливаю , ранее скачаную версию 3.6Е.
отформатирую и поставлю новую) посмотрю что там интересного

DahTank

Today I just updated V250905. Everything still is the same. FaceTime audio, the other party still cannot hear me when connected by CarPlay thru Dudu7 Headunit

What’s going on?

DUDU-Meng

DahTank The FaceTime call issue seems to have been fixed previously. From which version did you start experiencing problems?

DahTank

DUDU-Meng

I cannot remember the exact version. But before I got something like
2505xx

Then updated to via OTA
250829
250905

I never updated to any beta versions before

I was patiently waiting for this update to fix the issue but it’s doesn’t. The changes indicate above are also not showing up. Do I need to do a factory reset?

ebackbone

DahTank there was no official public release for 250829. you have definitely obtained a beta version and installed before if you had 250829.

if 250905 public release did not fix, there is a slight small possibility your installation is screwed up from mix of beta & public release. small, not 100%.

yes, you can try factory resetting to see if the issue is fixed.

DUDU-Meng

DahTank
Did you experience issues where the other party couldn't hear you during FaceTime calls before updating to 250829? Are you still having this problem after the update?
Are you using DUDU7?

Zheka

YAOXILONG обновился на эту прошивку,пропало изображение с камер 360,как исправить?

Btc3111

@DUDU-Meng Can you or someone on the team elaborate on this?

"In addition, we have upgraded the reversing image and panoramic 360 camera from Sony IMX307 to Sony IMX662"

Does this mean there's a new DUDU 360° Panoramic Camera Kit? Where can I buy one?

DUDU-Meng

Btc3111
I'm only involved in the technical aspects. For sales inquiries, please contact customer service.

grenoblours

Btc3111
I just bought from aliexpress front and reverse camera (only) from Duduauto.
My guess is they switch from Sony 307 sensors to Sony 662's (availability, and / or price, I don't know).
When I ordered mine, it was advertised as 307 sensors, but I received one of each (307 and 662). Both work on my Dudu7 head unit with latest firmware (250905).
Overall, I think they're pretty much the same, maybe the newest 662 is better in low light than the previous (from what I could see on aliexpress)
Anyway, last time I checked, all duduauto cameras sold on aliexpress are currently 662 sensors.
just my 2 cents.

DahTank

Btc3111
grenoblours
Try this

https://www.mekede-mall.com/?product=dudu-360panoramic-camera

bckwrd

Добрый день. Подскажите, есть в планах починить встроенную опцию NoKill?

« Previous Page Next Page »