Requesting a list of Steering Wheel Controls!!

Hammer2222

dudu-lai thank you immensely for the reply!
I am creating a custom steering wheel, with 3d printed button boxes. I have to figure out how many buttons to implement for the DUDU7, and this will help me so much. (Other buttons are for cruise control and a custom push button turn signal system, like seen in Lamborghini etc)
Again, thank you!

ElevatedVehicles

Hammer2222
Hammer, I hope it's ok with you but I screenshot your comment and put it in my video.
This video, linked below, shows every single steering wheel software option available as of 7/16/2025 if you go to the 1:25 mark of the video.
I hope this helps answer your question brother.

https://youtu.be/dsHh7ygalGM

UnagiC8

dudu-lai
How to set long press? I had junsun unit and there were those options - except volume buttons.

DUDU-Meng

UnagiC8
You will understand once you try it yourself.
After setting up the short press, you can add functions directly with a long press.

Blackbandt

DUDU-Meng I tried it too. But it's actually a little confusing and you don't know exactly how it works. So it would be nice if you could tell us how to do it

DUDU-Meng

Blackbandt
Set a short press, and there will be a prompt here. Tap it to select the long press function.

Skillzo1

DUDU-Meng

Does this also work with this style remote? This is the remote i use.

Blackbandt

DUDU-Meng Thank you very much. Now I finally know what the function is for.

UnagiC8

DUDU-Meng I don't have it on my DUDU5.

DUDU-Meng

Skillzo1
Sorry, I have never seen this remote control, so I don't know how it works. You'll have to test it yourself.
But I guess this kind of remote control would have its own app.

Skillzo1

DUDU-Meng the remote works very well. However i never tried a long press. Everything comes up with a number and also undefined like shown in your picture with arrow.

App??? There is no app atleast to my knowledge for this remote. Programming the the buttons for tap function gave no issue. It works pretty well. Occasionally it goes a little crazy and i have to relearn the buttons but its way more user friendly then the dudu remote.

DUDU-Meng

UnagiC8 Only DUDU7 will have it.

ElevatedVehicles

DUDU-Meng
for those of us on dudu7 with canbus module installed BUT we do want custom define steering wheel controls instead of using the default not assignable predefined steering wheel controls is there a way to keep the canbus module installed but bypass the canbus module only for the steering wheel controls so that we can define what we want the steering wheel buttons to do? Can this be done by connecting key1 key 2 wire to swc 1 swc 2 wires?

Mikescotland

ElevatedVehicles I have a canbus swc controller and I have it connected to key 1 and key 2. However, here is the trick. My car has two canbuses. One for engine and body, second one for multimedia and swc. So, this canbox for multimedia (connects2) has options and can simulate resistive buttons (for pioneer and for Chinese android HUs).
Any other canboxes from simple, hiworld etc - I didn't see separate wires to connect to swc, they send commands to HU via UART together with all engine related messages. In this case, that won't work, an app or settings would be required to remap incoming uart messages

ElevatedVehicles

Mikescotland O that is a bummer for case it seems since I only have 1 canbus module.
Thank you for the info.