Kolo457 dudu-lai okay I understand, so when should I expect update of can bus and how it will be done? Edit: sorry I didn't see your last post. I will do update of Can bus and I will let you know.
Kolo457 Kolo457 I just discovered that CAN BUS is not working at all, (wheel steering, AC, door opening) so it's crashed after update. I reset radio by pin, and can bus is not working.
Kolo457 dudu-lai after update Can bus animation is not showing on the screen and is no sound from sensors, what I need to do?
dudu-lai Kolo457 In Vehicle Information - Vehicle Settings - Turn on Enhanced Parking/Buzzer Switch/Warning Sound
dudu-lai Kolo457 Did you see a message indicating the update was successful? Did you press the RST button to reset the device?
Kolo457 dudu-lai Can bus is not working at all, I checked other functions, it's not only about sensors and beeping sound.
dudu-lai Kolo457 Can the device obtain the CANBUS box version information? Disconnect the CANBUS box power cord and reconnect it.
Kolo457 dudu-lai there was no information about successful or fail, process was very quick I reset after update.
Kolo457 dudu-lai How I have to do it if radio is turning off automatically every 5 second? Look in to the link. https://streamable.com/wa1ogp
Kolo457 dudu-lai Okay, I disconnected car battery and tired to do update of Can bus again and this time was successful, but animation is as was before ,.I added video with logs. https://streamable.com/3njhi6
dudu-lai Kolo457 Can you upload the video to Google Drive? I also need the version information after the firmware update is successful.
Kolo457 dudu-lai links below https://drive.google.com/file/d/1rKyWDetkXxfKmSiTTUbj-HB9eCMOfRSr/view?usp=drivesdk https://drive.google.com/file/d/130Fv9Tj-VMYwvn5iEXvZeZjWw8otKX7y/view?usp=drivesdk
dudu-lai Kolo457 OK, I've submitted it to the Raise engineer. I'll let you know the result once I get a response.
dudu-lai Kolo457 https://drive.google.com/file/d/1_vfPWxqSDeZ7Lvn1CrsmJxGfxIuDMvYQ/view?usp=sharing Hello, upgrade the CANBUS box to the new firmware
Kolo457 dudu-lai installed can bus update with animation disappearing looks okay (when sensors are switched off animation switch off as well) so that issue looks like resolved. But I have another issue, sometimes animation doesn't show on main menu when sensors are actived and additionally on apps like (Spotify) animation is not showing at all (looks like animation is not priorited when others apps working on, so when I have Google maps on and I want to use sensors on the parking I need to use main menu, otherwise animation is not gonna show "over application". This issue existed before can bus update. I have added link to video. https://streamable.com/6z04bn
