Rear view camera and sound question

Blackbandt

I want to install a universal rearview camera in my VW T5.2. How do I connect the camera correctly?

In the picture, you can see 1 for ground and 2 for 12V. Then there's B for reverse gear detection.

I have a Canbus Raise G-RZ-VW58. I have a brown cable on the Dudu7 wiring harness that says "back." Do I connect it as shown in the picture, or the cable with the B? How does the radio detect that I'm reversing and automatically switch to the camera so I get a picture?

I have this cable on dudu7

https://a.aliexpress.com/_Eu8kFke

Pavel-71

Blackbandt
I have a non-original camera on my Golf 6 with a canbus box, when I put it in reverse I measured 12v on the G5, I connected the camera and the image was black, I fumbled for a while, I tried powering it from F, nothing either, I switched it back to the G5 and I thought of going into the settings and I found the option to turn it on and the image appeared. It is not necessary to connect the ground, the cinch (CVBS) is grounded.

Reddeer2000

Hallo, normalerweise ist beim Dudu7 ein Kabelsatz für die RFK dabei. Diese wird unter F geführt siehe hier : https://wiki.dudu-auto.com/en/%E5%AE%89%E8%A3%85%E6%95%99%E7%A8%8B/%E8%BD%A6%E6%9C%BA%E6%8E%A5%E7%BA%BF%E5%9B%BE
Dort findest Du die gesuchten Anschlüsse für deine RFK.

Blackbandt

Reddeer2000 Danke dir für die Antwort. Das Kabel habe ich. Nur beantwortet das meine Frage dennoch nicht. Ich möchte wissen ob ich nur Plus und Minus anschließe und das Cinch Kabel in das Dudu stecke. Und er das umschalten Automatisch erkennt oder ob ich das kleine rote Kabel was am Cinch mir dran ist irgendwo mit anschließen muss

Reddeer2000

Das kann ich Dir leider nicht sagen, da ich eine originale Werks-RFK verbaut habe. Normalerweise müßte aber am F-Kabel ein Kabel für das Rückfahrsignal vorhanden sein.

Blackbandt

Reddeer2000 Alles klar ich Danke dir und schau Mir das noch mal genau an

Blackbandt

Pavel-71 Thanks for the explanation. If I understand it correctly now. I clamp the cable that is on my picture the nr2Thanks for the explanation. If I understand it correctly now. I clamp the cable that is No2 on my picture to G5 and only plug the RCA into the radio and it works?

Or do I clamp the cable with the designation B to G5 from the dudu?

Pavel-71

Blackbandt
Yes, I only have the G5 power supply connected to red B and the camera works after reverse gear is engaged. I didn't connect anything else. But it's possible that it will be different for your car. Anyway, try it, there are other instructions on wiki.dudu-auto:
https://wiki.dudu-auto.com/en/安装教程/倒车影像接线图

Blackbandt

Pavel-71 Thank you so far. When the camera is there I will test it.

If anyone else has an idea. He is welcome to contact us