DUDUOS 3.6 Official Release - Elevate Your Driving Experience！250515

MrWong

abidali

so i extracted the compressed file.... do i just copy this folder and put it into the thumb drive?

Favorit5503

MrWong copy the contents of the folder to the usb root directory

abidali

MrWong open that folder and copy everything to the USB.

Mativo

This USB installation will wipe out everything?

Favorit5503

Mativo normally no, you need an extra file to wipe out everything. I did the upgrade today and after i plug in the usb, opened the ota app and clicked on the local update and after the update i have everything.

Benruba2025

Joshua-Pech Buenas tardes, ¿puede explicar eso de crear una tarea para que CarLink 2.0 abra nada mas arrancar?

Joshua-Pech

Benruba2025 Claro en el apartado de mas ajustes, al final hay una seccion que dice accesos directos, tareas, etc.
La funcion que buscas es Tareas, la cual con un activador (encendido de vehiculo, deteccion de velocidad, RPM, abertura de puerta,etc) se desencadene una accion como puede ser abrir una app, iniciar musica, etc.

Es en el ultimo apartado de ajustes, deslizas hasta el fondo.

Saludos.

Geruda32

Hi, some questions:

Is it possible to change bluetooth name "DUDUAUTO" by custom bluetooth name ?
For Radio app: is it possible to clean image from radio station ?

Feature request:

For new A/C Control Panel (in Pop-up mode), resize vent control for a bigger one.
For new A/C Control Panel (in Full Screen), add a auto-close timer (like pop-up mode).
Ability to modify hard coded canbus steering wheel control.
Example: for my Peugeot 308 T9 (2014), i want to set the "Turn off screen" button to "Show A/C Control Panel"

For pop-up delay, is it possible to start timer delay after the last press ?
Actually, delay start when i open the pop-up, and whatever i do, it close automatically after 5 seconds (if the timer is set to 5 seconds).

Thanks

Mativo

i just plug in the usb like that to update?
will it wipe out my original data in the dudu7?

picasso1850

Mativo Yup, thats correct. Once you plug in the USB into headunit, you'll see a prompt on the screen to update. Once update is complete, remove usb device to reboot. Yes, you'll keep all your previously settings. If you wanted to wipe settings clean you'd pull the files from the factory reset folder and add to your root E: - otherwise it can stay as is.

liamstears

Anyone else have the issue when you click advanced settings in sound settings the audio goes quiet for just a second? It never used to do this...

Like this: https://youtu.be/4xdr5TCc4iQ?feature=shared

ed_co

Mgoodine

With the 3.6 update I can no longer add CarLink as a PIP app. Does anyone know how to add it. I liked having my CarPlay in the pip window. Thanks

Tswire

I can’t believe they didn’t fix this before releasing. I and others asked about this on beta 4. Ugh.

Open a discussion here and explain the bug perfectly including images if needed. In this current thread probably is not the place to make things moving...

Da5ftgiant

YAOXILONG anyone else having issues with multi touch turning off after engine off?

Cabrioman

Hello
After the update from Beta 3.5 to the official 3.6 i have a problem with the dudu 2k adas cam.
In the device connection Tab the cam ist shown as not connected.

avacon34

Cabrioman +1

dudu1897

Cabrioman I fouind out: You need to start the file manager and install an apk from an USB device. After starting it it will update the app.

gismo

#p10503 Add support for additional third-party peripherals - vGate vLinker MC+

Situation:

vGate vLinker MC+ supports two pairing modes, classic Android and BLE (named iOS)
Prior to this addition to DuduOS, I've been using vGate vLinker MC+ paired manually using Android BT Settings (#2nd BT chip) and it paired fine using classic Android mode. I use it with 3rd party apps such as Carscanner and VAG-DPF and get decent functionality including DPF status and clutch temperatures
I've read that I can use the new integration in parallel - and indeed I can now pair it under Settings/Devices very comfortably. It pairs to the BLE/iOS mode and I don't need a PIN even. It also shows "connected" and I can read certain vehicle data for my VW but nothing deeper like clutch temperature and DPF - so need to keep the 3rd party apps.
These 3rd party apps don't seem to find the adapter in BLE/iOS mode, only if I pair it to classic BT / 2nd BT chip
Consequently, I've paired the adapter using both modes and it now shows in both lists (in Setting/Devices as BLE/iOS and in Settings/Android/Bluetooth as classic mode. 3rd party apps find the classic one and work, but then DuduOS shows "not connected" for the BLE/iOS listed one. If I stop using the classic mode (paired but no 3rd party app connected) the BLE/iOS one connects and provides DuduOS readings. So the two lists seem mutually exclusive or the adapter can only serve one connection at a time.

Question: I've read somewhere that a shared use by DuduOS and 3rd party apps is possible - how do I configure things to achieve that?

If its mutually exclusive then I'd probably stick to the classic mode because the 3rd party apps can do so much more and because on my VW I get basic info such as outside temp / coolant temp / tank volume / seat belt / handbrake etc via the Raise Canbox anyway.

moreyruiz

Hello everyone,
After the update to DUDUOS 3.6 the buttons in the steering wheel for the voice assistant and the phone stop working. Before the update everything was working properly. My car is a 2018 Mitsubishi Outlander and the headunit is a DUDU7 11.5inch 12g 512g. I verified the canbus selection and it is the same I always used before. Any idea what wrong?
Thanks all for your help!

akoni

moreyruiz i also have outlander same with you, do you have a photo of your dudu7 in your outlander? Thank you

mircondini

Just updated (via OTA): why I don't have (see) Expanded Vehicle Ecosystem?

picasso1850

mircondini The A/C display and Expanded Vehicle Ecosystem aren't available for every car / canbus.

Michalisgk

Please add more OSD interface

mircondini

picasso1850 it's funny that my car has a display (in the dashboard) which allow reading lot of data (included door opening), but DUDU7 doesn't 🤔

« Previous Page Next Page »