Auto-adaptation

Sasha_White

Before applying Auto-Adaptation, the OS image is full screen. After applying the patch, auto-adaptation occurs again, after which a black stripe of 3-5 millimeters appears at the bottom of the screen. How can I fix it?

![https://ibb.co/V5Yj000]

![https://ibb.co/xcvKcGm]

caolz

Sasha_White
Check here

Sasha_White

caolz
All parameters are set to zero. If you move one slider, the area shifts to the center, but after returning to zero, the lower area still shifts and remains 2-3 millimeters. System animations (which go down) are also displayed in this black zone. The problem occurs after Autoadaptation. Is it possible to somehow flash the firmware immediately with a screen flip, without a script?

DUDU-Meng

Is the model number DUDU7?
I could make a script to get rid of the black border at the bottom, but then you can't swipe up to call out the navigation bar when it is hidden.
Also, you've installed the embedded screen a bit off, and the original black border at the bottom is exposed a bit.

DUDU-Meng

dudu7-remove-dark-edges.7z

828kB

Unzip to a USB stick The bottom black border will disappear after the upgrade.
Only the physical black border will remain

Sasha_White

Dudu5

DUDU-Meng

[DUDU5-6_remove_dark_edges.7z(http://netdisk1.dudu-lucky.com:18108/externalLinksController/downloadFileByKey/DUDU5-6_remove_dark_edges.7z?dkey=ff721f2b-04e5-4380-8e00-f26b86df1788)]
Okay, download this file and extract it to a flash drive.

Sasha_White

DUDU-Meng Unfortunately the script didn't help. I noticed that if I turn on the video via vlc player, the video is displayed on the entire screen! But the system still has a black bar...

DUDU-Meng

The bezel you installed does not cover the edges of the screen

Sasha_White

DUDU-Meng
[https://ibb.co/ZpsQkpYF
https://ibb.co/mFRrwMJp]
Here is a visual video of the full screen and the status bar.

Sasha_White

DUDU-Meng
Even the system animation that moves down goes through the black bar at the bottom.
![https://ibb.co/xKyzKcNY]

DUDU-Meng

In full screen The black bar at the bottom is where the screen edge fits and is not the LCD display area. Your bezel is too big. It's not covered.
The bottom black bar is bigger in the navigation bar state, you just need to upgrade the script I sent you to remove it and achieve the effect of full screen video.

Sasha_White

![https://ibb.co/hRCb986F]

DUDU-Meng

It's been confirmed that the little bit left at the bottom was designed and set aside on purpose.
It's the same design except for DUDU7.