Currie That is a very good suggestion given there are a lot of hardware available which can be supported on this device.
Jjmorrisson
- 29 Mar
- Joined Apr 22, 2024
- In Trip widget
Jsuy bringing this topic back up. It worked for me previously I am outside China. However with the new update it is not working anymore. I could see the total km's travelled each day on the calendar widget previously. Is that something to do with the Server location ?
I think this is a great idea.
- Edited
Yes you should be able to disable it. It should be under Advanced Settings unless you are referring to Toppal Voice Assistant.
Hello everyone.
Need advise on setting up external amplifier on the 2021 Toyota RAV4. The model comes with JBL sound system equipped with original toyota head unit. However now as we have an aftermarket Dudu7 device installed, what will be the best way of installing speakers and amplifier. What is the maximum output the device could provide, is it limited to the amplifier chip i.e
4 x 27 W 4Ω@ 14.4 V, 1 kHz, THD = 10% ?So if I have to add dashboard speakers i.e
- Pioneer TS - A879 rated at 4Ω with maximum 100W RMS , the headunit will only output 27W ? My question then is if I increase the power of the amplifier under the Sound settings would I then be able to increase the Wattage of the speakers.
Hi @YAOXILONG . Has the Weblate project been made private. I was in the process of translating some strings to English yesterday and half way lost access to the weblate project ? Has the process for translation changed ?
Great Work @Dudu team.
Hi Huang. That worked. Thank you so much. But I have one issue the sensor car image on the left side of the screen covers most of the birdeye view of the camera. Is there a way to make the sensor image smaller so that the background is visible ? The original controls on the camera screen also worked and the Panaromic Bird Eye button on the side of the steering wheel also worked.
DUDU-HUANG
Thank you Huang.
I will try to connect that cable to F. Do i need to connect the other cables from connector F like CAM12V and BREAK , IR to the wiring harness ?In the canbus settings I have selected Highlander however even selecting RAV4 2019-2020 it has the same effect as above.
DUDU-HUANG It would be nice to have the path displayed as a notification instead of embed inside the box.
- Edited
- Edited
To Dear Mods.
I am having issues displaying the reverse camera when the back/reverse gear is initiated. The reverse image can be displayed/viewed under AUX when reverse gear is initiated while" Reversing video screen switch " is turned off. However the reverse camera screen would not show up. If I turn the " Reversing video screen switch" to ON. The image will display for 1 sec under AUX however then will disappear due to the reverse image program is imitated. I know for a fact that the headunit can see the reverse camera as the image is displayed under AUX however I am unable to view the reverse image/video when reverse camera app is initiated.Video here:
My Vehicle details are as follow:
2021 Toyota RAV4 Hybrid Cruiser
Raise FT - RZ - 02 v52I have also attached a canbus log for you to review and troubleshoot.
Currently my wiring setup at the back of the head unit is as follows:
Could the developers please also look into updating the Canbus software. Some of the newer 2022 vehicles are now included which are not present in the current software.
- In Localization
The topic "Localization" refers to local changes in context to reference to translation, UI modifications (which would include fonts, images. boot animations ) ..and more.
It happens on international version as well. Better to integerate in updated firmware.