9

907diag

More like it just broke. I have never broken a micro sd card slot. I Wasn't forcing it it.

dudu-lai IDK if you didn't read my post al the way or if there is a language translation problem.
I asked if their is anything I need to know that IS NOT IN THE WIKI for the 360 camera.
2nd Their is literally nothing in the Wiki about how to actually use the camera or answers any of my other questions. Only how to install the base software, update and that you need a Micro SD card to record. By the way the installation no longer works on as described in the Wiki in version 3.6. That needs to be updated.

In order to improve the efficiency of communication, it is important to provide the following information when posting a message
【1】2k DVR ADAS Micro SD card slot retaining tab broke when inserting and SD card. So now the SD card does not stay in. Where would one go to get the camera warrantied out?

Blackbandt I had several issues after updating to 3.6. Including the steering wheel controls not working on my 2014 vehicle that does NOT use CAN BUS. The thing that has solved almost all of them was doing the update again, but not via "Local Update" in the OTA application. I needed up doing the traditional USB installation with Factory Reset. Yes it is annoying have to reset up everything again, but honestly I have noticed weather it is a phone, tablet or head unit it is best to basically do a hard drive wipe, reload, reinstall apps/accessories one by one and then set things backup.

【1】So I am nearing the end of my head unit installation. Just waiting on a USB cable. Some of the things that need to be done after the hardware installation is: 1 calibrate my 360 camera(They have been all tested and work as designed). 2 calibrate and figure out how to use the 2k ADAS front camera(Again it has been tested to make sure camera is generally working and records). So question 1. Is their anything I need to know about the 360 camera calibration and fine tuning before I get started that may NOT be in the wiki? Yes I do have a calibration cloth I purchased for the 360 camera setup. Next question is How do I set up the 2k ADAS camera and actually use the ADAS features? Does the camera automatically record while driving or when the head unit is on? Will it show something on the head unit home screen while driving? Does it have some sort of alert if something comes too close to the front of the vehicle? I do understand that this is a camera and that it is not the end all be all, since it does not use a radar in addition to the camera algorithms.
【2】2014 Hyundai Santa Fe Sport 2.0L Turbo. USA production. Vehicle did not have a factory navigation head unit or amplifier so CAN BUS was not needed to install. Vehicle does not have parking sensors. Vehicle does have factory blind spot monitoring(If anyone knows how to integrate that into the DUDU head unit 360 camera system I would be interested in setting that up).
【3】3: Forgot to bring my work computer home that has the screen shot of the current DUDU OS and app software level when writing this discussion, but I do know it is not on 3.6 OS at this time.

ManOfScience Yea the will not be adjustable. The rubber grommets should give you the correct downward angle on the vertical line. For me it is figuring out what is the correct horizontal line that is correct.

ManOfScience Because I am doing some custom wiring. Basically I am running the wires to factory connectors and along factory harness I needed some extension wires. When I have a minute tomorrow I will shoot you a link to what I have been suing. Beware I had to modify the connector end. One thing I did do is use double walled heat shrink to any 360 Camera connector that was going to exposed to the elements

I figured it out. My factory does actually fit. It is just a real tight fit. Which is good thing. Means I wont have to worry about loose connection.

I think the last thing/s that would really set Dudu7 headunits apart would be the ability to have standard software/hardware support for front and rear parking sensors. Either with a Dudu brand or third party ones.

So I am in the process of mounting and doing the wiring of my 360 camera's. My question is when I mount the cameras, is their preferred distance from the camera to the body of the vehicle? Also Should the cameras horizontal angle be parallel to the vehicles body or should they be parallel to the side mirrors? The vertical angles are a given with rubber grommets.

Vehicle: 2014 Hyundai Santa Fe Sport 2.0L Turbo. No Factory Navigation. Only factory reverse camera and hands free calling.
Head unit: Dudu7, 12G RAM, 512G ROM with 360 Panamera camera.

What seize is the Dudu 7 head unit radio antenna connector center pin and outer ground?

My vehicles factory one doesn't seem to fit soo I'll probably have to find an adapter or make one.

Ok. Thank you. And I figured it out why it is wired like that also after looking at the head unit diagram and 360 wiring diagram again.

Vehicle: 2014 Hyundai Santa Fe Sport 2.0L Turbo. No Factory Navigation. Only factory reverse camera and hands free calling.
Head unit: Dudu7, 12G RAM, 512G ROM with 360 Panamera camera.

Question 1: I am a little confused on wiring up the trigger wires for reverse and side cameras. The reverse camera. Do I connect the trigger line at the head unit connector to the head unit main connector, G5 and then connect the connector back at the camera to my reverse lights?
Question 2: In the instructions it tells you to connect the left/right camera connector ends, triggers to turn signals. But at the head unit connector end it says tape it up. Is this correct?