Announcement of Deeply Adapted Vehicle Models (CANBUS)

Dudys

Will there be anything for hyundai i30 gen3?

SeVeMaS

SeVeMaS
So, using this settings on the 61 model the gearbox problem is solved, but no AC support and no side parking sensors.
I still have the multi sense flower logo blocked on sport mode. My vehicle model does not have this option, and I can't change this settings on vehicle settings menu (yes I see the multi sense menu but can't change a thing).

dudu-lai

SeVeMaS I don't understand what you mean by the flower icon and the menu.

You haven't mentioned this issue before; could you describe it in more detail?

Opt1mus

Hello. Please add support for Dongfeng Aeolus E70 electric car. Before that, there was a cheap boss mini radio and there was full can protocol support, which is a shame...

SeVeMaS

dudu-lai yes i do Talk about that "flower" this is the multi sense symbol, is a option to select drive modes like Sport, Eco, normal, etc... With the raise 01 it won't show, but with the 61 it stays still and can't be removed.

dudu-lai

SeVeMaS The flower icon has appeared. What function does it represent now? Is it set to a specific driving mode?

Where did you previously change your car's driving mode?

SeVeMaS

dudu-lai this is a option in certain Renault models, my car does not have this option. The flower disappear when I selected Koleos low auto after the car is off for a long time (like 20 or 30 minutes). If I selected other model the flower commes back on and if I turnt it of and back on again the flower still there.
I didn't drive long enough to see if is there a driving difference.
I will try all Renault models to see if I get everything working.
For now it would be cool to have a Koleos or Kadjar auto gearbox option with high specs working so I can get the AC and the side parking sensors working

Cabrioman

Hello

Which is the right Box for a Mercedes W447 Vito from 2019 to used the highly integrated features ?

Greetings

dudu-lai

SeVeMaS Okay, but there's only one correct option.

SeVeMaS

dudu-lai I'm sure Raise engineer can make an update so I can select a different model and be able to use the AC and the side parking sensors. Like, add an compatible vehicle to the list like Koleos high auto. If you wish i still can send a log file from the AC commands

SeVeMaS

SeVeMaS
Other problem appears on selected Koleos - low auto. Collision detection error pups up, I need to put back the 01 canbus, I'm afraid for my security while driving.

Opt1mus

dudu-lai
Hello,

I have a Dudu 7 head unit with an OD CANBUS decoder.

My car is a Dongfeng Aeolus E70 (EV). Unfortunately, this vehicle is not available in the CANBUS vehicle list on the Dudu 7.

However, my previous Android head unit (Boss Mini), using the same OD CANBUS decoder, fully supported this car. In its CANBUS settings, the vehicle could be selected as:

OD → Dongfeng → Aeolus E70

This confirms that a working CAN protocol for this vehicle already exists.

Would it be possible to add support for the Dongfeng Aeolus E70 to the Dudu CANBUS database in a future update?

If it would help, I still have the old Boss Mini head unit installed. I can try to extract any files, configuration, firmware, or other technical information that may help your engineers add support for this vehicle.

Please let me know what information or files would be most useful, and I will do my best to provide them.

Thank you for your support.

dudu-lai

Opt1mus According to OD's public specifications for the OD-DF-10 model CANbus box:
Choose one of the following two options:
1: OD-BYD-ALL-OD
2: OD-Dongfeng-Aeolus E70
The device only needs to support one of these options. The DUDU unit supports Option 1.

Opt1mus

dudu-lai
Thank you for your reply.

I tested the OD-BYD-ALL-OD profile on my Dongfeng Aeolus E70.

At the moment, only the climate control functions are working correctly. Unfortunately, other important vehicle information is not displayed. Door status.

It would be greatly appreciated if support for the following vehicle data could be added:

Battery State of Charge (SOC, battery percentage)
Current vehicle speed
Outside temperature
Other available vehicle information transmitted over the CAN bus

This vehicle has recently become available in my country and is becoming very popular because it is the most affordable electric vehicle on the market. I believe that adding full support for the Dongfeng Aeolus E70 would benefit many DUDU users, not just me.

Thank you very much for your support. I would be happy to test any beta firmware or CANBUS update you provide.

dudu-lai

Opt1mus According to OD's publicly available information, it supports: air conditioning information, door information, and steering wheel angle information. It does not support the battery level, vehicle speed, outside temperature, and other information you mentioned.

If door information is not displayed, please record a CANBUS log.

Opt1mus

dudu-lai

https://drive.google.com/file/d/1OO16cOGRqJoZ1a2D7diXr7fg9SJ-XPil/view?usp=drivesdk

After spending about three hours testing different CANbus profiles, I found that the 666-Toyota Prado profile works much better with my Dongfeng Aeolus E70 than OD-BYD-ALL.

The only issue is that the dynamic reverse parking guidelines do not work correctly with this profile. There are also some extra climate control buttons that do not belong to my vehicle, and the Vehicle app displays incorrect values.

I have attached a video showing everything in detail. I hope this information helps you improve compatibility with the Dongfeng Aeolus E70.

dudu-lai

Opt1mus No need for such a complicated process. You only need to record the OB-BYD-ALL option and the CANBUS log of opening and closing the driver's door 3 times.

I also watched your video. The Fengshen E70 currently does not support controlling the air conditioning via the navigation bar. Please keep an eye on the compatibility updates in this post.

Enenet58

Hello!
Subject: Issue with Climate Control Display and Seat Heating on JAC JS4 2025 (Canbus Raise G-RZ-JAC57)
Message:
Good afternoon!
I have a 2025 JACJS4 equipped with the Canbus Raise G-RZ-JAC57 interface. I am experiencing an issue with the climate control display - it does not update and does not show the current temperature settings.
Additionally, the vehicle has seat heating functions, but they can only be controlled via the multimedia screen (there are no physical buttons).
Could you please help me resolve this problem? I would appreciate any advice on how to fix the display update issue and ensure proper functionality.

Enenet58

moreyruiz

Hi,
Can you do it for a Simplesoft RP5-MT--002?
2018 Mitsubishi Otlander.
Thanks

spoonzz

dudu-lai same issue unfortunately even after a reboot, ah well! Hopefully see an update/fix in future.

dudu-lai

spoonzz Please re-log the CANBUS log of repeatedly pressing the SYNC button.

dudu-lai

SeVeMaS Did selecting the options I mentioned for the Model 61 fail to resolve the transmission issue?
Please start a new thread; do not reply here.

nethaaji

Hi,

Do you have an update on the Nissan Qashqai Canbus?

« Previous Page Next Page »