DUDUOS 3.7 b2 251231 Update: Ending 2025 with a Bang

emespink

Cabrioman I found the solution.
go to SETTING -> Vehicle -> Factory Settings (PW:108) -> Reversing mode selection -> Panorama 360 Mode -> [ Reboot ] : Problem solved!

Wow... what a drama. This is very hard to find for revive 360 cam function again after this update. Dev team, please consider later for other people would not wandering every menu like me please.

Quick and bold update is also good try but keep better UI also makes better quality of DUDU's service and makes higher reputation.

Cabrioman

emespink

Thank you now it works

emespink

DUDU-Meng I found the factory menu manually, prompt message was not appeared to me unfortunately. but anyway thanks for quick following to solve the problem. All the best!

DUDU-Meng

emespink
I'm glad you were able to resolve the issue.

064852029

064852029
Hello the canbus issue caused by com.wow.fyt7862.base package but it seems not allow to downgrade. How can I install this package from 3.7b1 version?

DUDU-Meng

064852029
What is the problem?

Amer

DUDU-Meng ok will try this solution and update you with the feedback.

Amer

DUDU-Meng yes, at first i could not find it but when i did factory reset the reset instructions setup asked for the 360 camera and the other accessories whether i have them or not then when i clicked yes and that, the app reappeared finally. Still, i mean that the recent beta update had a new 360 app, but i can see that it is still the same old one. I am going to do the calibration as i finally got the 3d mat, so should i do the calibration using the old app, or there is apk or something for the new 360 camera app that i should do first to update the app so i do not do the calibration again ?

DUDU-Meng

Amer
Factory Settings
Scroll to the very bottom
There's an option for More Settings
Here you can switch to the new version of 360 Panorama
The two apps use different algorithms

064852029

DUDU-Meng After updating to 3.7b2, it cannot get tpms info from canbus. It always displays disconnected.
AC info is also unstable. Sometimes it keeps info from last start even I changed temp and mode. It will works again after restarting the engine.
I'm driving 2015 chevrolet cruze.

Amer

DUDU-Meng ok, great done that and it worked, it is a lot easier and faster, so this new version will be the basic version in the upcoming stable updates and we should stick and splice on it not the old one right ? As returning back will need resplice and that so we need to stick to a one now ? Thanks

liamstears

DUDU-Meng Sorry for the delay. I have attached. The problem only seems to be front doors and only when selecting RHD.

DUDU-Meng

liamstears
Alright, let's give it a try first.

emespink

I successfully moved to newer 360 camera app from factory settings. It is much detail and nicer than old version easy stitch adjust with 4.4m cloths.

But after adjustment process when I turn on panorama camera, "3D AVM is not activated!" Warning message displayed in screen. How can I activate 3D AVM or remove this message?

Thanks in advance

DUDU-Meng

emespink
Did you click on “Guide Debugging”?
Clicking this feature triggers this prompt. Restarting should restore normal functionality.

emespink

DUDU-Meng Thanks, when I reboot and connect wifi network with DUDU7, the message has gone successfully. Cheers!

branco

Hello, I own a SAIC Volkswagen Touran. Previously, I used the FYT7862, and I just purchased the public version of the FYT7870 12.3‑inch unit. Today, I will flash DUDUOS 3.7b1 onto my FYT public version via USB, which supports DUDUOS.

UnagiC8

I'm experiencing an issue with the playback controls (Next, Previous, Play/Pause) on my DUDU5 unit. For context, I do not have CANBUS installed.
The problem occurs when switching sources: if I switch from Spotify to the Radio app, the steering wheel controls work fine. However, if I pause the radio and try to play Spotify again, there is no sound. Even if I skip tracks using the on-screen buttons, the audio remains silent. Furthermore, the physical Play/Pause button on my steering wheel stays 'stuck' on the Radio app instead of controlling Spotify.
The only way to get Spotify working again is to open the app in full-screen mode (not just the PIP window) and then return to the home screen. Only then does the audio and control focus return to Spotify.

I wanted to upload video, but it says it's over 150,000kB - the file is actually only 12MB.

HAccord8

UnagiC8 i have the same issue with my TeyesCC3 running DuduOS but with CarLink 2.0 app (it only happens to any version after CarLink version 2.25.0926.1708 AND when device wakes up from sleep)

To solve i requested @YAOXILONG to sign the CarLink version 2.25.0926.1708 for me so i can downgrade.

Also like yours my SWC (play/pause, previous/next buttons) are setup through hardwire and not CANbus

Even though downgrading my CarLink fixes my issue now looking at exactly same your issue with Spotify app, makes me think it is more of DuduOS issue too not just CarLink

jeanxplay

Ive tried downloading the latest update 3 different ways and every time it ends in checksum failure. This is for the dudu7

ciubaka

jeanxplay you have to update using traditional USB installation method

benzol

ciubaka I have the same problem, and I use the traditional method via USB.

jeanxplay

ciubaka

So what is the point of local OTA if it doesnt allow us to use it for update packages? That just seems like it defeats the purpose of it.

ciubaka

benzol with traditional USB method you wouldn't even seen this error.

« Previous Page Next Page »