Hi there,
A friend of mine recently purchased the DUDU7 navi for his Toyota Sequoia 2015 (JBL sound option) and asked me for a proper install. All went fine until the moment we tried to connect the front camera he bought: https://www.aliexpress.com/item/1005007329786716.html?spm=a2g0o.order_list.order_list_main.35.38461802UdGwfA
I've connected the +12VDC and Ground properly and have also fed the camera video signal according to --> plug C, C1 ground, C6 Video in. as shown in here: https://wiki.dudu-auto.com/en/%E5%AE%89%E8%A3%85%E6%95%99%E7%A8%8B/%E8%BD%A6%E6%9C%BA%E5%AE%9A%E4%B9%89%E5%9B%BE ...
The factory rear camera works fine via a car harness adaptor that was also used to utilize the factory connectors: https://www.amazon.com/ViaBecs-Harness-Highlander-Connector-Supports/dp/B0BZ7YZDCV?th=1 --> the car has a factory JBL sound system option...
And now comes the odd part... when the front camera is connected, the rear one stops working, and the front is also non-working. The front camera works on its own (that I tried several times on a different car navi and also on another monitor that has video input). The "C" connector pinout is double-checked and is error-free.
according to : https://wiki.dudu-auto.com/en/%E5%AE%89%E8%A3%85%E6%95%99%E7%A8%8B/%E5%89%8D%E8%A7%86%E6%8E%A5%E7%BA%BF%E8%AF%B4%E6%98%8E --> front camera format support is 1080pn ???
But I came across a different post :
https://forum.dudu-auto.com/d/936-front-camera-wiring-harness/4
Where format must be explicitly 1080N? Can that be the issue?
Please advise... ???
