【1】So I am nearing the end of my head unit installation. Just waiting on a USB cable. Some of the things that need to be done after the hardware installation is: 1 calibrate my 360 camera(They have been all tested and work as designed). 2 calibrate and figure out how to use the 2k ADAS front camera(Again it has been tested to make sure camera is generally working and records). So question 1. Is their anything I need to know about the 360 camera calibration and fine tuning before I get started that may NOT be in the wiki? Yes I do have a calibration cloth I purchased for the 360 camera setup. Next question is How do I set up the 2k ADAS camera and actually use the ADAS features? Does the camera automatically record while driving or when the head unit is on? Will it show something on the head unit home screen while driving? Does it have some sort of alert if something comes too close to the front of the vehicle? I do understand that this is a camera and that it is not the end all be all, since it does not use a radar in addition to the camera algorithms.
【2】2014 Hyundai Santa Fe Sport 2.0L Turbo. USA production. Vehicle did not have a factory navigation head unit or amplifier so CAN BUS was not needed to install. Vehicle does not have parking sensors. Vehicle does have factory blind spot monitoring(If anyone knows how to integrate that into the DUDU head unit 360 camera system I would be interested in setting that up).
【3】3: Forgot to bring my work computer home that has the screen shot of the current DUDU OS and app software level when writing this discussion, but I do know it is not on 3.6 OS at this time.
