• DUDU OSFunction Request

  • Canbus, volume and volume controls, etc

Hello everyone

I got my dudu7 today and was able to test it briefly. So far for 10 minutes of testing, I'm very excited.

But I still have questions.

I own a VW T5.2 and bought a quadlock to iso canbus adapter.

It is this

https://www.caraudio24.de/Zubehoer/Radioadapter/KFZ-spezifisch/fuer-Audi/ACV-CAN-Bus-Interface-Quadlock-mit-Phantomeinspeisung-Fakra-auf-DIN-fuer-Audi-VW-Seat-Skoda::26554.html?refID=froogle&gad_source=1

What do I have to state on the radio? Since he asks me for an adapter.

Then I searched for the volume control for a long time. I then found it. Is there a way to always have the volume control in the foreground so that I can make it loud and quiet. I don't own a steering wheel remote control.

And the last thing.

I find the overall volume quiet compared to my Pioneer. I found a regulator that I think goes up to 480 or 490. I also set it very high. But I still find the volume too quiet compared to my Pioneer. Is there still a setting somewhere to increase the volume?

Thank you very much

You can change to Layout 1 in the bottom navigation bar settings and then add the +- for volume to the navigation bar

Thanks in advance for the answer.

And because of the other points, is there a solution?

You can also use this Bluetooth steering wheel controller that
The other two questions didn't see what they meant

Ok I understand.

The other two questions were as follows.

The overall volume is too quiet for my opinion. Is there a setting to raise it?

And the second question. I use an acv canbus adapter in my Volkswagen T5. What settings do I have to select in the dudu to use the right adapter?

Is the overall volume up to maximum still not enough?
Open Settings/Sound Amplifier/Advanced Settings/Sound Output/Adjust the amplifier power to maximum.
canbus You can select your canbox brand and model in the protocol setting, if it is in the list, it is OK.