• Bug FeedbackSoftware bug reception

  • Canbus Kia Optima JF

    हिन्दी

Lux One radio. Standard 360 system, sound via spdif. Maybe someone has encountered this. Firmware 3.5 the sound is loud, on firmware 3.6 beta the sound is three times quieter. Also on both firmwares it does not remember the inclusion of 360 review, each time you need to press the view selection buttons to turn on 360.

This board is a bug feedback board，In order to improve the efficiency of communication, it is important to provide the following information when posting a message
【1】Provision of system information，Settings - About - long press on the top left corner of the picture - it will bring up a message screenshot to send to us!
【2】We need to be provided with a detailed description of the error and the steps to reproduce it
【3】If you encounter system software errors (not third-party software), please provide logs for our R&D staff to analyse. Send us all logs from the duduos_crash directory.
【4】If there is an error report, but no corresponding log is generated, you need to capture additional ANR data, the specific steps are as follows, go to Settings-Vehicle-factory set-other-click on the sync ANR option
【5】For more information, read the top post on this board

Good day. A new problem has arisen when disconnecting the car battery, the settings for selecting the 360 ​​mode are erased. You can only reconfigure it by connecting the standard radio and making settings on it. Is it possible to somehow implement the settings without connecting the standard radio?

Hello, I don't have your radio for testing on my side. You can try adjusting the power amplifier power in the sound output settings for testing. In addition, you can enable the 360 function in the factory settings or switch to a normal reversing camera. The 360 configuration of the FYT platform is stored in an independent partition, and the data will not be cleared under normal circumstances.

5 days later

Good afternoon. When switching to 360 mode, there is no image, the power level adjustment does not work, in the car application you can only adjust the power reduction, while you can no longer increase it back.